Powering the HP41 externally



#2

I was contemplating fashioning a 4.8V external source for my 41's (basically 4 NiMH batteries in an external holder), and I am wondering how to hook it up.

With the battery holder out, I know that the leftmost contact is positive and the rightmost is negative, but I am wondering about the status of the middle two (negative and positive respectively) which bridge the middle two cells.

Are these two middle contacts merely a jumper to complete the circuit of all four cells? Or do they belong each to their own circuit?

In other words, when powering the 41 externally, can one use a single 4.8V source with a jumper across the middle two contacts, or does one need two separate 2.4V sources, one for the two left contacts and the other for the right two?

Forgive an ostensibly simple question. I just don't want to fry anything.

Les


#3

Quote:
Are these two middle contacts merely a jumper to complete the circuit of all four cells?

Les,

I can confirm they are just a jumper (the central cells in my 82120A battery pack don't touch the contacts inside the calculator).

You might want to take a look at
this link.

Gerson

#4

Hi Les,

The two central contacts in the battery compartment are only used to provide continuity to the alkaline cells pack.

They have no other use nor are they connected internally. In fact, the 82120A NiCd battery pac does not have any contacts in these positions.

You can safely power your HP-41 by applying GND to the leftmost terminal and +Ve (anything between 4.8v to 6.0v will work) to the rightmost.

Hope this helps.

Diego.

Edited: Oops, again late... sorry... ;-)


Edited: 17 June 2012, 11:50 p.m.


Possibly Related Threads...
Thread Author Replies Views Last Post
  Powering the HP82143A printer Steve Hunt 10 393 07-06-2012, 08:26 AM
Last Post: Steve Hunt
  HP-15c Powering on Giuseppe Marullo 6 159 06-07-2009, 04:56 PM
Last Post: Geoff Quickfall
  Powering the 82240B IR printer Les Wright 16 542 01-07-2007, 03:41 AM
Last Post: Les Wright
  i need help powering up hp48sx ross denys 3 161 12-18-2004, 12:17 AM
Last Post: Randy
  powering the 9114B Disk drive by AC only ... thoughts? Gene 5 243 02-25-2003, 06:31 PM
Last Post: Christof
  Powering the 9114B disc drive without a battery pack Tom Sherman 7 288 11-09-2002, 11:58 AM
Last Post: Tom Sherman
  Powering Classics from Alkalines Charles Perry 5 242 04-27-1999, 11:09 PM
Last Post: Dan Grelinger

Forum Jump: