Re: WP 34S Beginners Guide



#3

I have been working through the manual. It is a very good effort, I like how it is put together.

I have found something that is either incorrect, or my understanding of how it should work is wrong.

On page 165, regarding deleting and correcting data, it indicates if you key in an incorrect value and have pressed <sigma>+, that all that must be done is press <sigma>- to correct it. That does change the Xn value, but not the value in the X register, it only decrements X by the value of Xn since that is what was on the stack. I believe Last X should be keyed before pressing <sigma>- to ensure the X value is decremented correctly.


#4

I assume you are right. SIGMA+ is one of the few commands that disable stack lift so a RCL L just overwrites then n count in X and you can delete the data point with SIGMA-.

Time for a stats editor (similar to the matrix editor MED I wrote) that allows for list based statistics.


Possibly Related Threads...
Thread Author Replies Views Last Post
  [WP-34S] Unfortunate key damage with update to V3 :( svisvanatha 5 806 12-10-2013, 11:37 PM
Last Post: Les Bell
  WP-34S (Emulator Program Load/Save) Barry Mead 1 457 12-09-2013, 05:29 PM
Last Post: Marcus von Cube, Germany
  DIY HP 30b WP 34s serial flash/programming cable Richard Wahl 2 640 12-04-2013, 11:14 AM
Last Post: Barry Mead
  [HP Prime] Typo in English Users Guide Timothy Roche 2 386 11-15-2013, 04:10 AM
Last Post: dg1969
  WP 34S/43 ?'s Richard Berler 3 599 11-10-2013, 02:27 AM
Last Post: Walter B
  My FrankenCulator (wp-34s) FORTIN Pascal 4 617 11-09-2013, 06:18 PM
Last Post: FORTIN Pascal
  WP 34S Owner's Handbook Walter B 5 797 11-09-2013, 05:34 PM
Last Post: Harald
  wp 34s overlay and programming. FORTIN Pascal 6 788 11-08-2013, 01:28 PM
Last Post: Nick_S
  m.dy in display of WP-34S Harold A Climer 3 508 11-05-2013, 11:28 AM
Last Post: Andrew Nikitin
  WP 34s : An old problem coming back Miguel Toro 2 451 11-05-2013, 03:00 AM
Last Post: Marcus von Cube, Germany

Forum Jump: