OT: Cal-Tex or "How to remove the lid of an old IC"?



#8

Still puzzled about the manufacturer of the weird Unitrex 800K calculator chip and we decided to sacrifice one...

Short question: How to we remove the lid of a DIL package w/o destroying the chip?

Suggestions welcome.

Have a great week.

Regards,
Joerg


#9

I think a sharp knive will work out fine - at least that's how I did it before. If you trash your IC, I'll find another...


#10

Frank,

Sounds great. We could trade the chip for a TI-88 ;-))

Dir noch einen schoenen Sonntag / Have a great Sunday.

Joerg

#11

From experience, that could be a very risky task: In doubt ask Peter Nusser, cpu-galaxy.at.

"Nobody does it better..." Look and see!

http://www.cpu-galaxy.at/Article/Articles_startpage.htm

Martin

Edited: 6 May 2012, 2:26 p.m.

#12

Hi.

I have seen some IC's being cut and have their lid removed (Martin's proposed link to www.cpu-galaxy.net in one of the follow-ups has some very good examples), but what are the odds of having a sealing resin compound glued to the lid that would destroy the chip if the lid is removed? Isn't there a way to check for solid contents with some modern scan technology prior to try to remove it? If the chips are rare and one can be sacrificed, why not to make sure it is done accordingly?

My thoughts, though.

Luiz (Brazil)


Edited: 6 May 2012, 6:27 p.m.


#13

I've never yet heard of a metal-lid package that didn't have an open cavity containing the part. That's the reason the metal lid is necessary. If you seal it in resin, it doesn't need a metal lid.

#14

I'm not sure if the value justifies a former non-destructive inspection - as long as you don't have you own x-ray equipment ;)

#15

if you can get the lid to tin (just with normal solder), then a hot soldering iron will heat it up sufficiently to melt any gold-based solder OR soften the resin that appears to be holding it in place.

a neat trick with 2-part epoxies (araldite) is to place the glued item in boiling water - the epoxy will (often) disintegrate.


Possibly Related Threads...
Thread Author Replies Views Last Post
  WP 34S: Remove "m.dy"? Jim Horn 6 712 01-02-2013, 06:37 PM
Last Post: Paul Dale
  OT: Cal-Tex, Ferranti, Friden, or...? Joerg Woerner 3 480 05-09-2012, 01:12 PM
Last Post: Luiz C. Vieira (Brazil)
  OT: NO IC's :-) robertoataulfo 35 2,653 11-10-2011, 07:19 PM
Last Post: Dave Shaffer (Arizona)
  Corrosion ... best way to remove? Gene Wright 6 641 10-19-2011, 04:23 PM
Last Post: Ethan Conner
  Did CostCentral remove the HP15C page? Cristian Arezzini 28 2,187 07-27-2011, 01:45 PM
Last Post: Howard Owen
  HP15C LCD dust - any way to remove? JJDietrich 2 443 12-05-2010, 06:33 PM
Last Post: JJDietrich
  Interchanging IC´s in Spices Vieira, Luiz C. (Brazil) 2 373 06-17-2010, 04:04 PM
Last Post: Mark Henderson
  Geodat, any info about the ic's and unit? Geoff Quickfall 5 675 03-15-2010, 12:45 PM
Last Post: Klaus
  HP-41CX Zengrange: remove rubber fragments Rainer Wiedemann (Germany) 0 288 01-29-2009, 07:32 PM
Last Post: Rainer Wiedemann (Germany)
  The Oldest Hewlett-Packard IC,s never die. (Two) julio garcia (spain) 6 748 01-25-2009, 09:38 AM
Last Post: Saile (Brazil)

Forum Jump: