Re: HP41C



#2

I would like to thank all for their help and advice. I found that in addition to the posts the screw bosses were also damaged. They had broken away completely from the body of the calculator. This is how I made the repair.

Methylene chloride is not easily available due to its dubious effect on health. I used Methyl Ethyl Ketone (MEK)which is a good solvent for ABS. To reinforce the weld I used snall pieces of 50 micron ABS film carefully building up a strong weld over the bosses by melting the sheet into the body with MEK. A couple of layers have provided an extremely strong repair.

To repair the posts I preformed a cylinder of ABS fro the same film around a small diameter wire. This I inserted into the centre of the post welding it in place with MEK. I did the same on the outside of the post. The thin fil melts under the influence of the MEK filling up any cracks in the post again forming an extremely stron repair.

I left the repair for 48 hours before reassembling the calculator which is again working perfectly.

Best regards to all HP repairers.

Roger Hubbert


#3

Methlyene chloride is available at almost any hobby shop in small bottles of plastic welding solvent (various bran names). Hobbytown carrys it for sure.


#4

I live in the UK where possibly restrictions are tighter. Anyway MEK had done a good job!
Roger


Possibly Related Threads...
Thread Author Replies Views Last Post
  How to check / repair a HP 82106A module for HP41C calculator ? Eduardo Mingo 13 1,824 01-07-2013, 11:05 AM
Last Post: Diego Diaz
  A simple question about the HP41C or HP41CV Antoine M. Couëtte 6 1,246 12-16-2012, 04:06 AM
Last Post: Antoine M. Couëtte
  HP41C repair ? Michael Paul 4 923 09-30-2012, 11:26 AM
Last Post: db (martinez, ca.)
  A cheap HP41C for sale...........999 EURO only aurelio 4 1,015 06-04-2012, 03:46 PM
Last Post: jerome ibanes
  HP41C: Factorial (kind of) in MCODE Frido Bohn 7 1,372 05-26-2012, 09:18 AM
Last Post: Frido Bohn
  Picture of HP41C from "The Dream is Alive" Christopher Johnson 0 488 04-20-2012, 02:38 PM
Last Post: Christopher Johnson
  HP41C "Power Module" Frido Bohn 10 1,478 01-03-2012, 03:35 PM
Last Post: Geir Isene
  HP Time Module+Overlay! 82182A for HP41c robertoataulfo 1 560 01-01-2012, 12:33 PM
Last Post: Howard Owen
  HP41c+ : i still prefer it Michel Beaulieu 40 4,491 10-19-2011, 03:11 AM
Last Post: geoff quickfall
  Anyone know anything about this HP41C RAM / EPROM ROM SIMULATOR? Bruce Larrabee 11 1,722 09-30-2011, 02:25 PM
Last Post: Ángel Martin

Forum Jump: