Re: Repair of I/O ass'y on HP-41C



#2

Please describe the forum the technologie you use for repairing the I/O assembly.....


#3

Repairing the I/O assembly in the HP-41C series is generally a matter of some fairly small soldering. I use a binocular microscope with a high quality fine tip temperature controlled Metcal soldering iron. Here are a couple of examples of repaired assemblies. The first one was fairly easy, the second one was quite trashed. I have done worse ones, just didn't think to take a photo. I have to scrape the plastic coating off the copper foils to expose a surface to solder to. Then I use some copper foil with adhesive backing, cut to size, and solder it to the assembly. So far I haven't found one that I couldn't repair, and one required the copper foil to extend all the way to the point where the assembly makes contact with the PC board of the calculator. That one was a challenge, but it works fine.


This one had only one of the four contacts that didn't work.


All four contacts were trashed on this one.

These are just two examples. I am certainly willing to help anyone repair their own. Feel free to e-mail me directly or ask questions here. I will also do the repair for $20 to $25, depending on the severity of corrosion.


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP-41C PCB Repair Question. Kerem Kapkin (Silicon Valley, CA) 10 1,764 11-21-2011, 07:45 PM
Last Post: BobVA
  41c repair Paul Dale 12 1,816 02-28-2011, 11:42 PM
Last Post: Jerry Raia
  41C Card Reader Repair AlbertTocarLoseggs 1 609 10-06-2010, 10:54 AM
Last Post: Karl-Ludwig Butte
  HP 41C repair Thibaut.be 0 395 11-13-2004, 10:50 AM
Last Post: Thibaut.be
  Repair of I/O ass'y on HP-41C Dave Mabry 0 405 08-26-2002, 11:16 AM
Last Post: Dave Mabry
  hp 41C repair center. ricardo romero 1 524 07-25-2002, 12:45 PM
Last Post: Raymond Hellstern (Germany)
  41C repair Oliver Kraetzschmar 4 898 02-11-2001, 03:39 PM
Last Post: Andrés C. Rodríguez (Argentina)

Forum Jump: