HP-41 USB-82143A info released.



#6

Hi all,

I've released a preliminary manual as well as a simple utility build on top of a .NET VB serial terminal application.

Archive download is available here.

Basic interface directions required to build a suitable application on other platforms is also included in the manual.

Hope you find it useful (or at least interesting... ;-)

Cheers from Caribbean Sea.

Diego


#7

Yes Diego, very interesting, and likely also useful :-)

A couple of quick questions before I do a deeper reading:-

1. Will you make the HW available soon as well as re. 3.0 of Clonix config?

2. Will said revision also support page#4 in the GUI?

Saludos,
Ángel


#8

Hi Ángel,

Yes to both, and for the same reasons. I have not the source code of ClonixConfig.exe with me nor the parts to build the HP41<>USB interface modules.

I'm planing a small run of 20 units and obviously the release of required ver. 3.0 of the configuration utility which will allow (y)our beloved page #4... ;-) But this will have to wait until I get back home.

In the meantime, maybe someone can find the info from the manual useful to build an alternate platform utility.

Cheers from Dom. Republic.

Diego

#9

This is great Diego, one more capability to expand our good old HP-41! I read the information you provided and sounds like this is a Clonix module with Printer ROM emulation and output to USB/PC. Do you think it would be possible in the future to support something like the optical wand ROM and use that to transfer data and FOCAL programs into the HP-41 from USB/PC? Thanks !!


#10

Hi Kerem,

Yes, it have been built like a Clonix with I/O functionality.

The Clonix part has been modified to allow the extra functions without disturbing the ROM images replication.

Regarding other I/O devices emulation like the Wand (or the Card Reader), the most difficult part is that these type of devices make use of the IF signal which I must admit I don't quite understand yet, so a lot of research is ahead before a "simulated Wand" can see the *light*... :-)

Cheers.

Diego.


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP-41(CL): The easiest way to transfer FOCAL programs from a Linux PC to the HP-41 Geir Isene 13 1,300 12-05-2013, 02:40 AM
Last Post: Hans Brueggemann
  Gathering USB dumps for Connectivity Kit <-> 39gII communication... debrouxl 2 428 12-01-2013, 12:59 PM
Last Post: Marcus von Cube, Germany
  Droid48 Reader 1.2 Released Chris Dreher 0 215 10-23-2013, 02:26 PM
Last Post: Chris Dreher
  HP 50g info Jan 7 738 10-21-2013, 09:09 PM
Last Post: Mike Morrow
  Prime 'CONTENT' section not retaining info text Geoff Quickfall 2 386 10-17-2013, 05:24 PM
Last Post: Geoff Quickfall
  USB flashing/Li-po boards patryk 6 582 09-08-2013, 12:31 PM
Last Post: patryk
  SandMatrix Released - The trilogy is complete. Ángel Martin 3 474 08-30-2013, 05:35 PM
Last Post: Marcel Samek
  USB Chargers for HP calcs Matt Agajanian 3 401 08-18-2013, 10:58 PM
Last Post: Craig Ruff
  Latest & Last SandMath is released Ángel Martin 0 284 07-02-2013, 12:44 AM
Last Post: Ángel Martin
  Prime Info DavidShenk 0 248 06-14-2013, 11:39 AM
Last Post: davidshenk

Forum Jump: