WP 34S: New release on SF


I've put up a V3 release on SF. It will still need some polishing but should be working. If not, please tell us!


Edited: 13 Feb 2012, 4:43 a.m.


Enjoy everyone :-)

- Pauli


... and please don't forget to report to us the bugs which are in for sure :-)



Thanks, gents.

I am a late rather than early adopter and was waiting for the Sourceforge release. Till now I have been pleased with 2.2.

I like what v. 3 is doing with organizing program, register, and flash memory. It actually is simpler than the multiple library setup of v. 2.

The manual still needs to be cleaned as it still mentions the now obsolete SENDL function when discussing Serial I/O syncing with the emulator. Apart from that, looks amazing.

I satisfied myself with throwaway paper overlays for 2.2, but now have splurged on Eric Rechlin's proper vinyl overlays for this version. I am assuming that the keyboard layout is settled and will not change throughout updates to v. 3.

Again, thank you for this amazing project.


Edited: 22 Feb 2012, 1:37 a.m. after one or more responses were posted


Please let us know about all and any problems with the firmware and the manual. They will be addressed.

Yes, version 3 is a significant improvement over version 2. The flash management is out of sight better, not to mention having more free flash for users. We've separate programs, more functions, better accuracy for some functions, double precision and more. I definitely think it is worth buying a new overlay and letting v2 die quietly :-)

The version 3 overlay is pretty much fixed. We're arguing over SHOW & up arrow (alpha case change) on the ON button, so a trivial change might happen. However, we're well aware of the need to not alter the overlay so don't expect to need a new one even if things do change. Currently the up arrow enters the register browser and SHOW displays the full mantissa. We're thinking of changing this so that SHOW enters the register browser and up arrow does something else. The reason being is that f-shift and g-shift x<>y <( and )> display the mantissa in single precision mode, the parts of the mantissa in double and shift around the integer display. Thus the current SHOW behaviour is redundant.

The outstanding question is what to put on the case shift up arrow (if anything). Any suggestions?

We also have a (very) small number of free character bitmaps available, any suggestions here?

- Pauli


The outstanding question is what to put on the case shift up arrow (if anything). Any suggestions?

If we don't come up with anything better I would propose to enter lower case alpha mode directly with f EXIT. Let SHOW start the register browser and <( )> handle the display of numbers.

Possibly Related Threads…
Thread Author Replies Views Last Post
  [WP-34S] Unfortunate key damage with update to V3 :( svisvanatha 5 3,204 12-10-2013, 11:37 PM
Last Post: Les Bell
  WP-34S (Emulator Program Load/Save) Barry Mead 1 1,808 12-09-2013, 05:29 PM
Last Post: Marcus von Cube, Germany
  DIY HP 30b WP 34s serial flash/programming cable Richard Wahl 2 2,533 12-04-2013, 11:14 AM
Last Post: Barry Mead
  Another wish for next Prime firmware release Jose Gonzalez Divasson 0 1,127 11-21-2013, 06:55 AM
Last Post: Jose Gonzalez Divasson
  WP 34S/43 ?'s Richard Berler 3 2,067 11-10-2013, 02:27 AM
Last Post: Walter B
  My FrankenCulator (wp-34s) FORTIN Pascal 4 2,168 11-09-2013, 06:18 PM
Last Post: FORTIN Pascal
  WP 34S Owner's Handbook Walter B 5 2,686 11-09-2013, 05:34 PM
Last Post: Harald
  wp 34s overlay and programming. FORTIN Pascal 6 2,914 11-08-2013, 01:28 PM
Last Post: Nick_S
  m.dy in display of WP-34S Harold A Climer 3 1,954 11-05-2013, 11:28 AM
Last Post: Andrew Nikitin
  WP 34s : An old problem coming back Miguel Toro 2 1,743 11-05-2013, 03:00 AM
Last Post: Marcus von Cube, Germany

Forum Jump: