LiPo rechargable for 41 pack rebuilding?


Has anyone thought about using a small 2S LiPo battery pack for rebuilding an 82120A? A quick search found a small 120 mAh 7.4V pack (E-flite EFLB1202S20) that should fit with room to spare (30mm x 20mm x 9mm). It would need 3 diodes inline to drop the voltage to the calculator, and it looks like the standard LiPo charging connector might fit in the recharger connection opening.


There was a discussion about using LiPo batteries on this forum.

Google is your friend, e.g., search for:

82120a lipo


Doh! I only looked in the article section. I think using a 2 cell LiPo pack with voltage dropping diodes should work fine. I'll have a look at running a bench top test before going to the effort of retrofitting an old nicad pack case.

Possibly Related Threads…
Thread Author Replies Views Last Post
  HP 41 Battery Pack Rebuild John Ratard 0 2,107 09-29-2012, 01:37 PM
Last Post: John Ratard
  HP-41 Quiz: How to pack 100k in ROM? (on-line) Ángel Martin 10 2,905 09-02-2012, 10:35 PM
Last Post: Luiz C. Vieira (Brazil)
  Rebuilding a HP41 battery pack M. Joury 10 3,022 05-19-2011, 05:28 PM
Last Post: M. Joury
  Charging times for HP-41 rebuilt battery pack Timo 2 1,167 01-07-2011, 11:31 AM
Last Post: Timo
  Rebuilding an HP 41 battery pack DavidShenk 12 3,124 04-22-2010, 03:17 PM
Last Post: Alberto Fenini
  HP 41 Printer Battery Pack 82033A replacement Rolland Hamm 1 1,054 05-04-2007, 06:12 PM
Last Post: Les Wright
  Rebuilding a 21/25/25C battery pack Bruce Bergman 1 839 09-10-2006, 01:08 PM
Last Post: Hal
  Rechargable AAA cells on HP-71B? Karl Schneider 15 3,474 03-22-2006, 04:43 PM
Last Post: Andy Morales
  82490A HP-41 Translator Pack - Need Help Howard Owen 2 1,073 09-21-2005, 10:34 AM
Last Post: Howard Owen
  Rebuilding a HP-67 battery pack ALBERT 1 898 09-16-2005, 04:57 PM
Last Post: David Smith

Forum Jump: