LiPo rechargable for 41 pack rebuilding?


Has anyone thought about using a small 2S LiPo battery pack for rebuilding an 82120A? A quick search found a small 120 mAh 7.4V pack (E-flite EFLB1202S20) that should fit with room to spare (30mm x 20mm x 9mm). It would need 3 diodes inline to drop the voltage to the calculator, and it looks like the standard LiPo charging connector might fit in the recharger connection opening.


There was a discussion about using LiPo batteries on this forum.

Google is your friend, e.g., search for:

82120a lipo


Doh! I only looked in the article section. I think using a 2 cell LiPo pack with voltage dropping diodes should work fine. I'll have a look at running a bench top test before going to the effort of retrofitting an old nicad pack case.

Possibly Related Threads...
Thread Author Replies Views Last Post
  HP 41 Battery Pack Rebuild John Ratard 0 1,950 09-29-2012, 01:37 PM
Last Post: John Ratard
  HP-41 Quiz: How to pack 100k in ROM? (on-line) Ángel Martin 10 2,371 09-02-2012, 10:35 PM
Last Post: Luiz C. Vieira (Brazil)
  Rebuilding a HP41 battery pack M. Joury 10 2,575 05-19-2011, 05:28 PM
Last Post: M. Joury
  Charging times for HP-41 rebuilt battery pack Timo 2 976 01-07-2011, 11:31 AM
Last Post: Timo
  Rebuilding an HP 41 battery pack DavidShenk 12 2,624 04-22-2010, 03:17 PM
Last Post: Alberto Fenini
  HP 41 Printer Battery Pack 82033A replacement Rolland Hamm 1 894 05-04-2007, 06:12 PM
Last Post: Les Wright
  Rebuilding a 21/25/25C battery pack Bruce Bergman 1 682 09-10-2006, 01:08 PM
Last Post: Hal
  Rechargable AAA cells on HP-71B? Karl Schneider 15 2,880 03-22-2006, 04:43 PM
Last Post: Andy Morales
  82490A HP-41 Translator Pack - Need Help Howard Owen 2 892 09-21-2005, 10:34 AM
Last Post: Howard Owen
  Rebuilding a HP-67 battery pack ALBERT 1 753 09-16-2005, 04:57 PM
Last Post: David Smith

Forum Jump: