HP Forums › HP Museum Forums › Old HP Forum Archives v
WP 34S: Release Planning

Linear Mode
WP 34S: Release Planning


▼
Marcus von Cube, Germany Offline
Unregistered
Posts: 3,283
Threads: 104
Joined: Jul 2005
#2
10-25-2011, 04:35 PM

We are planning to spit out a 'final' V2.2 release of WP 34S as a ZIP file. I have made a few crucial modifications to the power saving scheme (finding more bugs in the process than I'd like to admit). Chances are high that I screwed something up so I kindly ask you to update your 20b or 30b and use it to tell me what needs to be fixed. Please no ideas what should be added because new functions are exclusively planned for the next release! I'm talking about bug fixing here.

At present, the overlay works fine with one exception: x<>y in the f and g shifted planes. In normal mode, they generate y<> and z<>. But don't cry out too loud too early! ;-) The functions a->x and x->a are still on the keyboard: Just switch to alpha mode and the functions are mapped to their positions marked on the overlay. I would like to leave this in as a compromise and not change the mapping back to what it was in V2.1.

Find
▼
Alexander Oestert Offline
Unregistered
Posts: 429
Threads: 31
Joined: Jul 2011
#3
10-26-2011, 01:35 AM

I'm ready for testing! Is it up already?

Quote:
I would like to leave this in as a compromise and not change the mapping back to what it was in V2.1.

:-(

Find
▼
Marcus von Cube, Germany Offline
Unregistered
Posts: 3,283
Threads: 104
Joined: Jul 2005
#4
10-26-2011, 02:21 AM

Quote:
I'm ready for testing! Is it up already?
As usual in SVN. I don't think it's ripe for being zipped.
Find
Alexander Oestert Offline
Unregistered
Posts: 429
Threads: 31
Joined: Jul 2011
#5
10-27-2011, 02:24 AM

Quote:
At present, the overlay works fine with one exception: x<>y in the f and g shifted planes. In normal mode, they generate y<> and z<>. But don't cry out too loud too early! ;-) The functions a->x and x->a are still on the keyboard: Just switch to alpha mode and the functions are mapped to their positions marked on the overlay. I would like to leave this in as a compromise and not change the mapping back to what it was in V2.1.

In the beginning I didn't like this idea. Now, after having played with it a bit, I think this is how it always should have been! It's the most intuitive solution I can think of!

To make the keyboard appropriately reflect this function switch I am thinking of printing a tiny [y<> and z<>] label on a paper sticker and putting it above the key beneath the [GRAD]. Is the artwork already updated with this?

Edited: 27 Oct 2011, 2:25 a.m.

Find

Possibly Related Threads…
Thread Author Replies Views Last Post
  [WP-34S] Unfortunate key damage with update to V3 :( svisvanatha 5 3,297 12-10-2013, 11:37 PM
Last Post: Les Bell
  WP-34S (Emulator Program Load/Save) Barry Mead 1 1,869 12-09-2013, 05:29 PM
Last Post: Marcus von Cube, Germany
  DIY HP 30b WP 34s serial flash/programming cable Richard Wahl 2 2,603 12-04-2013, 11:14 AM
Last Post: Barry Mead
  Another wish for next Prime firmware release Jose Gonzalez Divasson 0 1,152 11-21-2013, 06:55 AM
Last Post: Jose Gonzalez Divasson
  WP 34S/43 ?'s Richard Berler 3 2,128 11-10-2013, 02:27 AM
Last Post: Walter B
  My FrankenCulator (wp-34s) FORTIN Pascal 4 2,246 11-09-2013, 06:18 PM
Last Post: FORTIN Pascal
  WP 34S Owner's Handbook Walter B 5 2,752 11-09-2013, 05:34 PM
Last Post: Harald
  wp 34s overlay and programming. FORTIN Pascal 6 2,985 11-08-2013, 01:28 PM
Last Post: Nick_S
  m.dy in display of WP-34S Harold A Climer 3 2,001 11-05-2013, 11:28 AM
Last Post: Andrew Nikitin
  WP 34s : An old problem coming back Miguel Toro 2 1,801 11-05-2013, 03:00 AM
Last Post: Marcus von Cube, Germany

Forum Jump: