HP48/38 overhead projector interface



#2

The HP38 has a direct connection for an external LCD (intended for an overhead projector). The HP48 requires a plug-in card. The HP48 bus doesn't seem to include any signal for vertical sync : on the HP38 this may be provided as the pin 'VCO' (but I haven't got one, so I can't check).

Can anyone tell me how the vertical sync signal is generated on an HP48 card ? Is it encoded somehow into the data stream (there are more bits in a line than are needed for the 131 pixels), or does it rely on software in the HP48 to drive hardware in the card ?

Is the 'VCO' signal on the HP38 interface a vertical sync, or is it something else ?

-adrian


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP48GX Interface to a PC John W Kercheval 7 557 09-29-2013, 10:53 AM
Last Post: John W Kercheval
  HP Prime "Symb" interface (bug?) Han 8 591 09-13-2013, 12:48 PM
Last Post: Chris Tvergard
  Virtual HP-IL Video Interface ILVideo the 2nd! Christoph Giesselink 3 363 08-15-2013, 06:49 PM
Last Post: Sylvain Cote
  HP 85 Serial Interface; INPUT Example? inaki 1 277 06-12-2013, 11:09 PM
Last Post: Paul Berger (Canada)
  HP 38 C emulator Olivier De Smet 2 264 06-10-2013, 08:29 AM
Last Post: Olivier De Smet
  Virtual HP-IL 40 col. video interface simulation Christoph Giesselink 10 690 08-19-2012, 06:46 PM
Last Post: Richard Wagoner
  Cursors on Video Interface HP82163 Christoph Giesselink 4 368 07-21-2012, 02:57 PM
Last Post: Sylvain Cote
  [WP-34S] Micro projector ever? Chris Tvergard 6 390 06-01-2012, 09:21 AM
Last Post: Chris Tvergard
  41CL & EMU41 & IL2000 interface system Christoph Klug 0 156 03-22-2012, 05:23 PM
Last Post: Christoph Klug
  HP-IL SCSI Interface Richard Wagoner 15 861 02-19-2012, 07:39 PM
Last Post: Richard Wagoner

Forum Jump: