HP-41 Card Reader Error



#2

I recently rebuilt my Card Reader. The card runs smoothly, but I consistently get Card Err or Malfunction or Checksum Error.

Some threads point to the 2 contacts. I swapped and checked to make sure they are flat. I applied contact cleaner as well.

I tried a different calculator, but that didn't work.

Suggestions?


#3

Hi Adam,

If you get inconsistent results, then I'd say there is hope. And I presume you had never seen such errors before the rebuild /

My guess is that you need to spend more time adjusting the roller pressure.

Is the motor struggling ?

Cheers,
John


#4

I swapped the rebuilt drive assy with another card reader I had.

This assembly works great. So, I presume from browsing older posts, the cause of these errors/malfunctions could be the capacitor adjacent to the sense amplifier chip. I will try this next after I rebuild another drive unit.


Possibly Related Threads...
Thread Author Replies Views Last Post
  Reasonable price for a 41C, Quad Mem, Time, Navigation and Card reader module? Eelco Rouw 10 1,507 12-12-2013, 01:52 AM
Last Post: Eelco Rouw
  hp-67 card reader problem. Marcel Samek 5 928 12-09-2013, 09:09 PM
Last Post: Paul Berger (Canada)
  [HP Prime] "Error while checking exact value with approximate value, returning both!" Chris Pem10 13 1,701 12-06-2013, 05:12 AM
Last Post: parisse
  HP-41(CL): The easiest way to transfer FOCAL programs from a Linux PC to the HP-41 Geir Isene 13 1,837 12-05-2013, 02:40 AM
Last Post: Hans Brueggemann
  MS advert shows spreadsheet with obvious error BruceH 3 725 11-14-2013, 09:50 AM
Last Post: Bill (Smithville, NJ)
  HP Prime: Rounding error in determinant Stephan Matthys 3 563 10-25-2013, 09:29 PM
Last Post: Walter B
  HP Prime Error: Summation Upper Bound > 1000 HP Pioneer 2 476 10-25-2013, 11:32 AM
Last Post: steindid
  Prime Error or Mine? toml_12953 12 1,290 10-22-2013, 10:35 AM
Last Post: toml_12953
  Explaination on How to Reset Caculator in Users guie: error Harold A Climer 5 786 10-15-2013, 02:11 AM
Last Post: cyrille de Brébisson
  Repair of HP-34C - Error 0 and Error 9 Jeff Kearns 3 558 10-11-2013, 12:29 PM
Last Post: Randy

Forum Jump: