Current Consumption and Program Performance HP15CLE



#4

Test Units:

15CHHC2010 CNA02130778, Code:2009-08-03

15CLE CNA1310KH3/02290, Code:2011-04-15

External 3V power supply, CR2032 Cells.
Fluke 8060 Multimeter

------------------------------------------

I have verified that both the HP15CLE and the HP15C2010HHC draw about 20mA when any key is pressed. I tested this with both an external power supply and an externally applied CR2032 cell. They both draw about 20mA when a program (the LBL A + GTO A loop) is running.

Also, when the ON key is pressed to turn the calc off and held, it continues to draw 20mA until released.

Program execution time Performance:

The 15CLE is about 20% faster than the 15C2010HHC unit (also running the LBL A + GTO A loop). I wonder if this is due to code differences or manufacturing/component tolerances.

TomC


#5

It would be interesting to see the results of the Savage Benchmark for your examples. See message 68 in this thread for a listing for the 15C-LE and instructions.

My 15C-LE does the standard 2500 iteration test in about 48 seconds. The original 15C takes 5840 seconds.


#6

I'll look into that.

Further tests have shown a great variance in timing tests. I have not yet determined which machine (or machine) is varying, but the difference now is closer to 1%.

TomC

#7

Both my 15CLE and 15CHHC2010 complete the Savage Benchmark in 50 seconds with 2499.969898.

TomC

#8

If I designed a battery powered product that worked like that, I would have got the arse!

And I'll say it again, the HP design team were well aware of the issue 2 years ago, so no excuse.

Thankfully it could be fixed with a firmware upgrade.

Dave.

Edited: 21 Sept 2011, 9:41 p.m.


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP Prime: run a program in another program Davi Ribeiro de Oliveira 6 864 11-11-2013, 08:28 PM
Last Post: Davi Ribeiro de Oliveira
  HP-35 and HP-65 Current Requirements Dan Lewis 0 314 03-05-2013, 12:11 AM
Last Post: Dan Lewis
  Charging Current in HP97, 82143A, 82162A Les Wright 5 733 06-17-2012, 02:11 PM
Last Post: Les Wright
  HP 20S with very high "off" current Neil Hamilton (Ottawa) 2 425 04-01-2012, 11:49 AM
Last Post: Neil Hamilton (Ottawa)
  HP-15C LE : Workaround for the high current spike Lyuka 14 1,284 01-12-2012, 04:43 AM
Last Post: Lyuka
  HP50g - High power consumption Frido Bohn 2 417 10-21-2011, 04:34 AM
Last Post: Frido Bohn
  15C LE current draw issue Katie Wasserman 36 2,724 09-15-2011, 09:53 AM
Last Post: bill platt
  HP 15C LE Memory Corruption After Self Test Performance Mike Morrow 16 1,354 09-10-2011, 06:29 AM
Last Post: snaggs
  WP34S: Power consumption exschr 6 667 06-07-2011, 04:22 AM
Last Post: exschr
  OT ->Tim Wessman: TI-Nspire current draw Joerg Woerner 1 351 05-08-2011, 12:11 PM
Last Post: Tim Wessman

Forum Jump: