[WP34S] [Manual] Units conversion question


Hello all,

In the manual dated 2011-09-15, p. 75, the "amplitude ratio to dB" formula is writen as 10 * lg (R)
Page 76 shows the reciprocal conversion (is that the correct wording?) as using a multiplying factor of 20.

The dB <-> power conversions seem consistant (pp. 76 & 77), and use the 10 factor I am familiar with in EE.

Would anybody know of a field of engineering or science, in which something called an amplitude, would actually have a "dimension" akin to a power (using a dB factor of 10), therefore causing a confusion?


I am a EE, but haven't used these units much.

I do know that electrical power can be in peak values, or RMS average values. I don't know if this comes into play here.

But here is a units website that deals with dB values and there seem to be some agreement with these conversion, but you have to know if you are basing the conversion on peak (full scale), or average.


decibels don't have units, per se, but there are different scales.


Hi David,

Thanks for the link. I knew there were units I had never heard about :-)

About electrical power "varieties", they do not come into play (they do "behave" in the same way), but one has to be consistant (peak / peak or RMS / RMS) between the two values being evaluated, in order to keep the scaling factor being meaningful.



This comes into play when talking about gain of, say amplifier, since power ratio is a square of input/output voltage ratio



Something like that (its been decades..)



First let me apologize for not not knowing how to address you, I am not familiar with your mother tongue & culture, so even if I recognized your frst from your last name, I would not be sure which one to use.

Thanks for your input, you are indeed correct.


Bonjour Etienne,

deziBel denote ratios of two measurements of equal kinds. Such ratios are dimensionless (or unit-free). So no problem with a logarithmic scale. Confusing - maybe. But useful e.g. assessing noise, amplifiers, damping, etc.

Edit: The factor on page 75 must be 20, of course. Thanks for pointing to that! Will be corrected in next edition. Merci!

Edited: 21 Sept 2011, 2:44 a.m.


Hello Walter,

It seems I was not entirely clear.

As you noted, my point was that I thought there was an inconsistency in the manual. Not being able to read the code, I could not decide which scale factor was correctly documenting the function you had actually implemented. That is now solved.




Thank you for posting the question Etienne. I learnt something today!


Hi all,

FYI, I committed an updated manual at sourceforge some minutes ago. Hope all glitches are treated. But don't nail me for the number of flash pages - it keeps changing all the time.

To those happy few who go: Enjoy the conference!

To the rest of us: Hope we'll get some overlays from Eric nevertheless.



I've updated the release package with the recent changes.

Possibly Related Threads...
Thread Author Replies Views Last Post
  HP 35s polar/rectangular conversion CD Dodds 6 842 11-28-2013, 02:39 PM
Last Post: Dieter
  [HP Prime] Calculating Prandtl Number with Units (bug found in USIMPLIFY) Timothy Roche 1 449 11-13-2013, 04:07 PM
Last Post: cyrille de Brébisson
  [WP 34s] Pressure Conversion Factors Timothy Roche 8 1,089 11-04-2013, 07:17 PM
Last Post: Dave Shaffer (Arizona)
  More programs for polar-rectangular conversion on HP Prime Michael de Estrada 4 753 11-04-2013, 12:43 AM
Last Post: Michael de Estrada
  Using units in Numeric Solver Harold A Climer 1 420 10-13-2013, 10:44 AM
Last Post: Tim Wessman
  HP Prime, Units and RPN... Edthesped 7 791 10-03-2013, 12:03 AM
Last Post: kris223
  HP Prime: Conversion factors Paul Townsend (UK) 19 1,625 08-27-2013, 09:19 AM
Last Post: Nigel J Dowrick
  Typo in wp34s PRINTED manual (not pdf) Barry Mead 3 535 08-05-2013, 04:21 PM
Last Post: Walter B
  Typo in wp34s Manual Barry Mead 12 1,166 07-23-2013, 07:23 AM
Last Post: Paul Dale
  wp34s Manual Page Reference Barry Mead 1 401 07-23-2013, 07:13 AM
Last Post: Walter B

Forum Jump: