HP 41C display problem



#6

Hi experts!

I have recently acquired a 41C, serial No. 1947..., with a screwed on CPU PCB, so not easily removed.

Keying in numbers or letters shows something like this


The flaw occurs on the third position from the left, its shape depending on the number/character I'm keying in on the first (!) position. Most characters give something like an R shape on the third position, characters like "I", "J", "1" or "7" will produce a more slender shape in the third display position. In any case there is also an underscore in the second position and some semicolon and points all around. If this is too hard to understand I will make a video... ;)

I've helped myself by putting a program on a key in USER mode that shifts the display by four alpha spaces to the right. But this is not very convenient.

Does anyone know what can be done against this? Is it a matter of (ultra sonic) cleaning the keyboard and display? Is the graphic engine gone for good?

Thanks in advance!


#7

Two causes come to mind:

- contact problem of either CPU pcb and/or LCD tray pcb

- defective LCD driver

In any case, you may have to remove the CPU pcb and check the contacts.

Often there is some acid residue (or corrosion, the green stuff) from leaked batteries.

Also check the contact points between the LCD and the kbd pcb.

I had various of the old units where at least one of the metal strips had gone loose.

HTH

Ray


#8

Thanks, I will follow your hints!

A.

#9

I disconnected the CPU PCB from the keyboard PCB and found it clean. Nevertheless I cleaned it with isopropyl alcohol.

Then, I found the leftmost (looked at from the back) of the connections between the LCD and the keyboard PCB to be loose. I soldered it back on to the keyboard PCB, but there seems to be no lead coming from the soldering point on the keyboard PCB. It looks like I soldered it to the PCB plastic?!?! Should there be something?

Edited: 11 Aug 2011, 5:19 a.m.


#10

No, depending on the revision of the LCD pcb,
there won't even be a metal bridge;-)


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP-41c display problem Ignacio Sánchez 6 821 09-04-2013, 10:52 AM
Last Post: Ignacio Sánchez Reig
  Can the display for a HP32Sii be replaced with the display from another model? Bruce Larrabee 8 1,081 10-10-2012, 10:05 PM
Last Post: Luiz C. Vieira (Brazil)
  HP41 Display Problem Fouad M. Kaadou 3 552 06-29-2012, 07:46 AM
Last Post: Fouad M. Kaadou
  Sharp PC 1211 display change -- problem overnight -- suggestions? Gene Wright 12 1,151 05-16-2012, 03:31 AM
Last Post: Bart (UK)
  HP 34C display problem james summers 11 1,246 04-05-2012, 06:07 PM
Last Post: james summers
  Re: more HMS, aTIME, 34s display, 41c bugs? Christopher Johnson 0 264 03-05-2012, 11:20 AM
Last Post: Christopher Johnson
  more HMS, aTIME, 34s display, 41c bugs? Christopher Johnson 2 396 02-25-2012, 10:06 PM
Last Post: Luiz C. Vieira (Brazil)
  HP-41C bad display - where to start from ? Alberto Fenini 8 992 02-12-2012, 02:01 PM
Last Post: aurelio
  34C display problem Daniel CLEMENT 8 835 07-11-2011, 09:45 PM
Last Post: Michael de Estrada
  Hp-42s display problem aj04062 9 900 02-27-2011, 08:36 AM
Last Post: aj04062

Forum Jump: