Slightly OT: simple math dilemma



#15

I was asked by a colleague yesterday about real solutions to equations, i.e.,

sqrt(1-x)-sqrt(x-3)= 0

Question: is 2 a solution? and at what level of math should it be accepted as a solution.
Most math texts will say it's not a solution: if y=sqrt(1-x) and y=sqrt(x-3) are graphed, they don't intersect in the real plane, yet the real number 2 is a solution (can't argue with that). So what constitutes a real solution. I claim you can't slide into the complex world and then back to real world; or since 2 isn't in the real domain of the functions, it can't be considered as a solution.

One thing led to another, and it got me thinking about the value of (-1)^(2/6).

At first glance I "want" it to be +1, since we have "even" powers, (sort of).

On second glance it could be 1/2 + sqrt(3)/2 i, (the principal sixth root of a negative is complex; and then squared).

But, on third glance, basic algebra says to reduce all rational exponents to lowest terms before evaluating, which gives us -1. Hmmmm.

The TI-8X calculators give the third-glance result (-1) and produces a graph from -inf to +inf (the typical cube root function).

Mathematica gives the second-glance result (complex value), and a graph from 0 to +inf accordingly.

Back On-track, slightly:
my HP-15 gives -1 (as expected). Haven't checked the others.
my 28S gives the complex answer (as does my Casio) and graphs for only x>0.

I've yet to find one that gives +1 (bummer,even powers and all).

What do other calculators (hp or non-hp) give,and what "should" it be?

I now can only presume TI's are for the less mathematically mature student, and HP's are for the more mathematically advanced. (Ouch!)

But I wait your opinions.

Enjoy.


#16

Anything that solves the equation is a solution IMHO. Just not always the desirable or sensible one.

#17

sqrt(1-x)-sqrt(x-3)= 0




can be transformed into:




sqrt(1-x)=sqrt(x-3)




thus, squaring both sides leads to:




1-x = x-3




and consequently to:




1+3 = 2x




and to:




x = 2




Is this too simplistic?




Regards


#18

Quote:
x = 2

Is this too simplistic?


Nothing it soo simplistic as long as it's correct. ;-) But this solution isn't. You ran into an absolutely classic error here.

Consider the original equation

   sqrt(1-x) - sqrt(x-3) = 0
For a real result this implies that both 1-x >= 0 and x-3 >=0.
   1 - x >= 0  =>  x =< 1
x - 3 >= 0 => x >= 3
So x must to be not more than 1, and at the same time it has to be greater or equal to 3. In other words, a (real) solution is impossible here. Your result 2 as well as any other.

What's wrong with your result? There are two things.

First, you did not check the valid domain for a possible (real) result. Since the obtained value 2 does not fall in the domain for a valid result, it simply is no solution at all.

Second, the step where both sides of the equation are squared is the weak point here. While "-4 = 4" is obviously wrong, squaring turns it to "16 = 16", which is correct. ;-)

There are lots of other occasions that look tricker than initially expected:

    (x^2 - 1)  /  (x - 1)
= (x+1)(x-1) / (x - 1) ; x-1 cancels out
= x + 1 ; really ?-)

Of course the first and third line are not equal. Try to plot both graphs and look at the point where x equals 1. ;-)

Dieter


#19

Dieter,

I don;t understand your last example. The two expressions _are_ the same: the only difference would be that (x^2-1)/(x-1) appears to be undefined at x=1, but the limit of x -> 1 for (x^2-1)/(x-1) is perfectly defined (just write x=1+e, for small e, to find (x^2-1)/(x-1) = 2+e, and take the limit e-> 0)

The confusion in all this discussion is whether certain factors can be undefined, such as 1/(x-1) in your example, while the full expression (x^2-1)/(x-1) is perfectly valid and has correct continuous limits at all points on the real axis (which is the case).

Maarten

#20

Quote:

(x^2 - 1) / (x - 1)
= (x+1)(x-1) / (x - 1) ; x-1 cancels out
= x + 1 ; really ?-)

Well, for me is

(x^2 - 1) / (x - 1) = x + 1

If you factor

(x^2 - 1)

you get

(x+1)(x-1)

and thus, the equation I quoted is an identity.

If you try it the hard way with cancelling out

(x-1) off (x+1)(x-1) / (x - 1)

you get

x+1.

Then, we have the "challenging" equation

(x^2 - 1) / (x - 1) = x + 1

Factoring (x^2 - 1) gets

(x+1)(x-1) / (x-1) = x+1

Cancelling again x-1 gets

x+1 = x+1

and needless to say

x = x


I never tried to graph x=x, and neither the ancients greeks tried to solve a mathematical problem by means of graphing. They used geometry, and it worked fairly well. Perhaps, somebody can show me a geometric solution of this '(x^2 - 1) / (x - 1) = (x+1)(x-1) / (x - 1)' problem?
#21

f(z)= + sqrt(1-z) - sqrt(z-3) over C has a root in z = 2, it comes from the imaginary part of f(z), there's nothing weird.

wolfram alpha

(I prefer this one,

sqrt(1-z) - sqrt(z-3) = 0

i sqrt(z-1) = i sqrt(3-z)

(z-1) = (3-z)

z = 2

)

Cheers

Edited: 13 Apr 2011, 10:36 p.m.

#22

.

Quote:
I claim you can't slide into the complex world and then back to real world

Disagree. Here you are, a classic counterexample:

Best regards from V.

 
#23

Quote:
I claim you can't slide into the complex world and then back to real world

No, there are situations where you may only find _real_ solutions by using complex math.

Ciao.....Mike


#24

I always liked i^i = exp(-PI/2). The result "seems" (at first) so non-intuitive.

Probably the group that has the most day-to-day routine control of a process whose behaviour is described by real and imaginary complex variables is AC electric generating plant control room operators. They control their station's output of REAL load (MW) and REACTIVE load (MVAR), which can be represented by vectors in phase quadrature with each other. Unlike the MW loading, the MVAR loading can be grossly varied with no effect upon the fuel consumption of the machine driving the generator. Thus it even has a sort of "imaginary" aspect to it. :-)

#25

The confusion arises because you don't define the domain of the sqrt-function. If it should give only real results then the best you could use is: 0 <= x.

But with this condition you would get:

0 <= 1-x   ->   x <= 1

0 <= x-3   ->   3 <= x

These two conditions are contradictory, thus no solution exists.

However when you allow all real numbers as domain of the sqrt-function you will get complex numbers as intermediate results. There's no problem with the fact that the end-result is real.

Conclusion: without specification of the domain, a function is not defined, thus the equation is meaningless.

Cheers

Thomas

#26

The result of (-1)^(2/6) is defined as a number which, raised to the power of 6/2 (or 3), gives -1, hence one of the three possible values in the complex plane.

Is there a point in rearranging the expression to ((-1)^2)^(1/6) ? Or to ((-1)^(1/6))^2. The former would reduce the number of solutions to 1, the latter to 6 (which might collapse to less by squaring, I haven't checked.) In the latter case, 1 should be one of the solutions.

Writing this down, I tend to the idea that the expression has six solutions in the complex plane, the real values -1 and 1 being amongst them. I'm still puzzled.


#27

They actually do collapse to only three values; two complex and -1 (using De Moivre's formula) . My desired +1 just isn't there. :(

#28

Excellent discussion. It seems the level of math a student has is what may determine the expected result. I presume a student who has not been introduced to complex numbers would have to assume square-roots of negatives are not possible and therefore no solution.

A student with a rudimentary knowledge of complex numbers would conclude that 2 is an easily found and appropriate answer.

And a student with a fairly thorough knowledge of complex numbers would recognize that the complex result for (-1)^(2/6) is preferred, but that there are a total of three solutions.

Along with this, I find it very interesting the results that are given by various calculators and math programs. One can start to glimpse the mathematical sophistication of the manufacturers target consumer population. Fun stuff.

Edited: 13 Apr 2011, 11:20 p.m.


#29

I think you're mixing things up a little bit, it's actually complex analysis 101 to prove that any complex number has n different nth roots, and the first problem's answer is x=2, rudimentary or not ;)

Edited: 13 Apr 2011, 11:47 p.m.


Possibly Related Threads…
Thread Author Replies Views Last Post
  Need help understanding math.... cyrille de BrĂ©bisson 9 4,006 12-13-2013, 02:23 AM
Last Post: Didier Lachieze
  Simple Tetris. free for you to improve on cyrille de BrĂ©bisson 3 1,977 11-20-2013, 05:43 PM
Last Post: Erwin Ried
  [HP-Prime] Simple Game (Bugs) CompSystems 1 1,457 11-01-2013, 10:18 AM
Last Post: Han
  OT: a math competition site Pier Aiello 0 1,094 09-16-2013, 06:03 AM
Last Post: Pier Aiello
  Simple Math Question Namir 2 1,442 08-09-2013, 06:13 PM
Last Post: Eddie W. Shore
  Cool math clock Bruce Bergman 28 8,072 04-10-2013, 03:13 AM
Last Post: Siegfried (Austria)
  HP-42S with Electroluminescent screen and simple I/O port Jose Poyan 8 2,838 03-27-2013, 07:11 PM
Last Post: Jose Poyan
  Simple sample programs for the HP-41CX? Tom Lewis 5 2,133 03-25-2013, 07:11 PM
Last Post: Allen
  Simple? programming question [WP34S] Shawn Gibson 3 1,497 03-15-2013, 11:56 AM
Last Post: Didier Lachieze
  Good (simple?) calculation for benchmarking? Jedidiah Smith 28 7,490 03-01-2013, 05:13 PM
Last Post: Harald

Forum Jump: