82240B IR Printer Runs Sluggishly, then Doesn't



#2

Hi all, I haven't been around for awhile as I got enticed for a bit by shinier handheld things.

Anyhow, I recently fired up my previously flawlessly working IR printer after I don't know how long. At first, even with adequate power (from AC Adapter or fresh batteries) the printing operation was "sticky". The printer seemed to work haltingly at light print intensities, and usually would abort printing and become stuck if I set the intensity slider above the half way point.

Well, after running I don't know how many metres of paper through the thing by repeated runnings of the self-test or long jobs such as long program listings, it looks like things are back to normal. The only bit of maintenance I dared was to brush the tiniest bit of oil onto the twisty little bar that scoots the head back and forth, and to use a photographer's bulb to blow some air inside in the belief that dust and debris was bunging up some little drive belt or gear. However, these interventions didn't seem to help at first--only running the thing for some time seemed to "unstuck" the operation.

I admit to storing the thing in a room cursed with dust and cats, so that is the only culprit I can think of. But I have read here of people using these printers in very unclean environments, like carpentry shops, without difficulty.

Any thoughts? Is this basically debris and dust that had to dislodge in time, or am I facing something worse?


Possibly Related Threads...
Thread Author Replies Views Last Post
  Use 82240B as computer printer R. Pienne 3 1,276 12-09-2013, 12:19 PM
Last Post: Marcus von Cube, Germany
  Help: HP-41CX and IR module Marcel Samek 13 2,194 11-14-2013, 11:00 AM
Last Post: Marcel Samek
  emu48 - copy stack doesn't work (as expected) Thomas Radtke 2 1,047 11-11-2013, 02:19 PM
Last Post: Thomas Radtke
  IR printer failure Andrew Nikitin 7 1,375 11-05-2013, 11:25 AM
Last Post: Andrew Nikitin
  Trouble dumping Pioneer ROM via IR Neil Hamilton (Ottawa) 6 1,334 06-20-2013, 08:14 AM
Last Post: Neil Hamilton (Ottawa)
  HP42S and IR printer matti 9 1,564 06-10-2013, 12:11 PM
Last Post: matti
  Anyone got a 39gII and doesn't mind memory loss? bhtooefr 4 912 05-19-2013, 03:57 PM
Last Post: bhtooefr
  Does IR printing not work on your converted WP34s? Then read on... Harald 3 891 04-04-2013, 05:46 PM
Last Post: Harald
  IR Link Problem: HP48 <-> PC Waon Shinyoe (China) 1 586 03-16-2013, 03:37 AM
Last Post: Eric Smith
  WP-34s data exchange with PC over IR Marcel Samek 3 834 02-26-2013, 11:53 PM
Last Post: Marcel Samek

Forum Jump: