Hi all,
I don't know where to look so I am asking for some assistance here.
A friend of mine asked help to develop a automagic satellite dish tracker (stationary).
Basically, we put togheter compass and GPS data to move a dish automatically to receive HotBird.
We have tested the basic formulas and they seems okay against the tables provided for latitude and longitude.
Now I would like to add pitch and roll of the truck in the equations to account for small angles that could lead to errors.
I have roll&pitch from 2 accelerometers in degrees resolution -+1 degrees increment (or I could access raw accelerometer data).
These are the formulas we are using:
PosLat = (2*M_PI*PosLat) / 360.0; // truck latitude to radians
PosLong = (2*M_PI*PosLong) / 360.0; // truck longitude to radians
SatLong = (2*M_PI*SatLong) / 360.0; // sat longitude to radians
v1 = 6.612 * cos(PosLat)*cos(PosLong-SatLong)-1;
v2 = 6.612 * sqrt( 1-(pow(cos(PosLat),2)) * pow((cos(PosLong- SatLong)),2));
SatElevation = atan(v1/v2);
SatAzimuth = M_PI + atan( tan(PosLong-SatLong) / sin(PosLat) );
SatPolarization = -atan( sin(PosLong-SatLong) /tan(PosLat) );
clear();
SatElevation = (SatElevation * 360.0) / (2*M_PI); // sat elevation in deg
SatAzimuth = (SatAzimuth * 360.0) / (2*M_PI); // sat azimuth in deg
How could I modify the formulas to account for pitch & roll of the truck?
Could you eventually point me to any site that could explain to me easily how to achieve this?
TIA.
Giuseppe Marullo
giuseppe.marullonospam@iname.com
PS: remove nospam to reply