HP15C LCD dust - any way to remove?


I just bought an HP-15C, serial number 2313A05258. There is a small black speck of who-knows-what on the display and it looks like it's trapped between the outer display and the actual inner LCD display. Is there any way to remove this?

I removed the back, and that's as far as I had the guts to go, so I just put it back together. I suppose I can live with it, but it's annoying! Thanks!



Check out this thread.



Thanks! After some fiddling around, I got it, and fixed another little problem I didn't know existed. FYI here's what I did:

1. unscrewed and removed the back panel

2. peeled back the 2 overlapping protective film pieces (slowly, tried not to rip the adhesive tape. Wasn't 100% successful but close)

3. used tweezers to gently pull up the battery terminal clips

4. there were 3 little square bumper type things sitting on little plastic posts on each corner of the LCD area, so I used tweezers to carefully remove them and set them aside - this is the problem I found that I wasn't aware of - there was a 4th bumper sitting loose, which had caused the gap to form originally between the LCD and the plastic screen allowing the original gunk to end up there. Clearly these bumpers are used to gently press the LCD screen against the outer plastic window once you reassemble since the back panel has extensions which fit right over those bumpers - sort of a female version of the post. The LCD circuit board is attached via a flexible piece on the right side, and is not directly/rigidly attached to the rest of the electronics - this is what allowed me to easily accomplish the next step:

4. with the LCD basically free (although still attached at the right side), I gently pulled up the left side, letting a little gap form between the LCD and the outer screen. then I picked the whole thing up, rotated it backwards, let gravity hold the gap, and reached in with the tweezers and gently touched the gunk which came right out

5. reassembled

Good as new! (well, as new as a 25 year old calculator can be). As I mentioned, those 4 little square bumpers are now back around the LCD, so now there is a nice tight "seal" between the LCD and the outer window.

Possibly Related Threads...
Thread Author Replies Views Last Post
  Vintage HP 15C with bleeding LCD display Michael de Estrada 1 1,179 10-30-2013, 09:54 AM
Last Post: Jeff O.
  1984 HP15C rattles Footloose (Illinois) 4 1,578 10-15-2013, 09:43 PM
Last Post: BobVA
  HP15c continued fraction for Ln(Gamma) Tom Grydeland 0 934 09-30-2013, 05:48 AM
Last Post: Tom Grydeland
  Missing LCD segments (48 SX) Matti Övermark 2 1,128 09-18-2013, 03:50 PM
Last Post: Matti Övermark
  HP 32s LCD part Trisnadi Sutrisno 2 1,144 08-27-2013, 02:12 PM
Last Post: Han
  hp 39gii lcd clear question giancarlo 7 2,212 08-18-2013, 07:30 AM
Last Post: Mic
  10BII LCD Repair K Gobeski 0 806 06-19-2013, 08:58 AM
Last Post: K Gobeski
  HP 75d: pale lcd characters Michael Fehlhammer 0 670 02-25-2013, 07:04 AM
Last Post: Michael Fehlhammer
  HP15c LE emulator with unlimited number of activations Nick_S 23 5,048 01-24-2013, 03:59 PM
Last Post: Victor Quiros
  battery test for the HP15c Limited Edition Guido (Canada) 3 1,352 01-03-2013, 08:17 AM
Last Post: Jeff O.

Forum Jump: