(Trivia?) Display setting



#6

Name an HP-manufactured RPN calculator that, when set to FIX 2 display mode (and with any fraction mode turned off), does NOT display 0.01 when displaying the result of 70 1/x.


#7

My 30b in RPN mode with FIX 2 displays 0.014. Looks like it displays 2 significant digits. Enter 0.000033 and that's what it displays.

On pages 2 and 3, the 30b manual says that the FIX=N value is "the number of digits displayed to the right of the decimal point."

The 20b displays 0.01.

Dave


#8

Correct. I ran across this earlier today when I wanted exactly five digits to the right of the decimal point and couldn't get them.

I'm trying hard to like the 30b. It's small, fast, and then something like this pops up...

#9

Quote:
My 30b in RPN mode with FIX 2 displays (1/70) as 0.014. Looks like it displays 2 significant digits. Enter 0.000033 and that's what it displays.

On pages 2 and 3, the 30b manual says that the FIX=N value is "the number of digits displayed to the right of the decimal point."

The 20b displays 0.01.


While the HP-30b does not seem to meet its specification, neither the HP-20b nor HP-30b handle this as did the "old school" HP's for FIX n:

The scientific models would revert to scientific notation (SCI n) if the number was too small for FIX n to show any significant digits. The business models, however, would keep increasing the number of decimal digits (FIX n+1) until one significant digit could be displayed, then use SCI n only if necessary.

FIX display on business vs. scientific

These display formats seem to have been tailored to the likely users of the respective models.

-- KS


Edited: 1 Dec 2010, 1:06 a.m.

#10

Why RPN, particularly? Any calculator should yield 0.01 answer to the stated example, in FIX 2 mode.


#11

It does it in chain and algebraic modes, also.

Mark


Possibly Related Threads…
Thread Author Replies Views Last Post
  HP Prime - Revision Suggestion - Setting the Clock Bill Triplett 5 2,249 11-15-2013, 12:36 AM
Last Post: Joe Horn
  setting up subroutines that are called many times... Geoff Quickfall 4 1,945 10-18-2013, 03:41 AM
Last Post: Geoff Quickfall
  HP Prime Tip: Setting Up User Keys Eddie W. Shore 2 1,597 09-27-2013, 09:53 PM
Last Post: Eddie W. Shore
  HP-41C Trivia Question Dan Grelinger 12 3,123 03-12-2013, 09:57 AM
Last Post: Dan Grelinger
  Can the display for a HP32Sii be replaced with the display from another model? Bruce Larrabee 8 2,971 10-10-2012, 10:05 PM
Last Post: Luiz C. Vieira (Brazil)
  41-MCODE trivia: backwards or forwards? Ángel Martin 3 1,547 03-05-2012, 04:38 PM
Last Post: Håkan Thörngren
  Totally useless trivia... 41 Ángel Martin 2 1,213 12-07-2011, 09:38 AM
Last Post: Don Shepherd
  16 segment Led display would mimic a HP-41 display? Giuseppe Marullo 3 1,695 11-12-2009, 08:08 PM
Last Post: db (martinez, ca.)
  Trivia: Which HP can't display its own programs? Mark Edmonds 2 1,112 09-24-2009, 04:07 PM
Last Post: Mark Edmonds
  Trivia Question Mark Edmonds 24 5,100 08-15-2009, 11:42 PM
Last Post: Walter B

Forum Jump: