Dust under 42S display



#5

I'm sure this is discussed somewhere on the web, but has anyone ever successfully disassembled a 42S to clean out accumulated dust between the LCD and the window?

Any other nifty techniques (maybe blast compressed air into the battery compartment, etc) to dislodge the dust under the lens?

I like that the 42S is small enough to be a true pocket calculator, but I guess years of dust and lint in my pocket is finally catching up to it.


#6

Sure it can be done. But if it's only dust.... I wouldn't want to see it die in process. The "pioneer" series was never designed to be serviced - they went in the trash at HP and they sent you a new one. But thats old history and that doesn't happen any more (new HP, new game, thanks Carly?).

If you are very brave and don't mind paying $150 and upwards for a replacement if things go bad, see Paul Brogger's article in the articles forum:

Pioneer "Observational Internals"

PS: I disassembled mine for the first time a few weeks ago due to an unfortunate accident. It wasn't that hard to do once you decide to take the plunge. It is now relegated to the "parts only" status since I was unable to repair it. It is still apart and I could take some photos to help you along if you have any questions. Pauls article is very clear but is text only.

#7

<Any other nifty techniques (maybe blast compressed air into the battery compartment, etc) to dislodge the dust under the
lens?>

I would suggest against this. I tried this with a 41C and only made matters worse.

Good luck.

Christopher

#8

I have cleaned dust from under many a '41 and '42 display using canned compressed "air". Never use a stndard compressed air line as they almost always spew water and oil along with the air.

Place the tube from the can into any available orifice near the display (the card reader latch holes on a '41 or the battery compartment of a '42) and pulse the valve on the can a few times. Usually the offending scuzz go flying away... but sometimes it stays (try another hole) or even something new shows up... try again.


Possibly Related Threads...
Thread Author Replies Views Last Post
  Can the display for a HP32Sii be replaced with the display from another model? Bruce Larrabee 8 991 10-10-2012, 10:05 PM
Last Post: Luiz C. Vieira (Brazil)
  Another One Bites the Dust aj04062 23 1,763 06-26-2012, 11:16 PM
Last Post: sylvandb
  Blowing dust motes off 41 display Ángel Martin 10 914 06-24-2012, 09:28 PM
Last Post: Diego Diaz.
  42s questions and 42s vs 35s snaggs 13 1,689 09-19-2011, 02:44 AM
Last Post: snaggs
  Hp-42s display problem aj04062 9 826 02-27-2011, 08:36 AM
Last Post: aj04062
  HP15C LCD dust - any way to remove? JJDietrich 2 415 12-05-2010, 06:33 PM
Last Post: JJDietrich
  HP-42S display Dick 4 475 06-24-2010, 05:57 PM
Last Post: Martin Pinckney
  cleaning the dust from an HP12C display Alberto Fenini 1 306 04-30-2010, 01:50 PM
Last Post: Kees van der Sanden
  16 segment Led display would mimic a HP-41 display? Giuseppe Marullo 3 567 11-12-2009, 08:08 PM
Last Post: db (martinez, ca.)
  Spec of dust in a 16C LCD screen R.J. Soto 4 502 10-15-2009, 01:04 PM
Last Post: R.J. Soto

Forum Jump: