HP71 zebra connector



#8

Dear All,


I had posted few days ago a couple of pics of an HP71b I'm working on.

It was basically missing the zebra connector.

Following your suggestions and the pics found on Etienne's web site

I have done my best to replace it.








These are the left and the right side of the HP71b with
the new connections.

To my surprise, the number of connectors available on the left side is 16while
on the right side we have 17points.

To me it looks that the first and second soldering points on the
right board

are actually the same connection, neverless the question is :

how the heck should I connect letf with right ???

Needless to say, I have attached the power supply but the units is still dead (well, it could be due to a million reasons anyway ....)

As always, any suggestion is VERY welcome !!!

Take care and thanks in advance, Alberto


#9

Hi,

Sorry, couldn't help noticing. There are 17 connection points on both sides. You have missed the 4th one from the top in the top picture, and second one from the bottom in the bottom picture (which indeed seem to be connected).

Good luck, hope you get it working.


#10

Hi, and thanks for noticing it,

I knew about the 2nd from the bottom, I did it on purpose

since I thought it was connected with the adjacent

let me try agin and I'll post the results

thanks again ! Alberto


#11

and it ..... WORKS !!!!!!!!!!!





since it was purchased for 65,00 US$ on TAS described as

"HP-71B non working for spare parts" I must admit the
some time TAS is not too bad ...

thanks everybody for helping me out,

take care Alberto


#12

Congratulations!! Always good to see an old calculating/computing device working again :).


#13

The 71 is a classic, one of a kind.


#14

The world is one HP-71b better! Congratulations! My first real computer, and still one very powerful machine.


Possibly Related Threads…
Thread Author Replies Views Last Post
  [HP-Prime] connector made with printer3D CompSystems 0 1,044 10-18-2013, 04:53 PM
Last Post: CompSystems
  HP41 / SY41CL Mini-B USB Power Connector (Module) Matt Kernal 5 3,278 07-08-2012, 06:23 PM
Last Post: Diego Diaz
  [41CL] Alternative serial connector, saving a port Kerem Kapkin (Silicon Valley, CA) 24 7,008 07-06-2012, 11:51 AM
Last Post: aurelio
  hp 41 series wire-wrapped connector question. Matt Kernal 3 1,727 06-19-2012, 01:48 AM
Last Post: Luiz C. Vieira (Brazil)
  RED HP71 John W Kercheval 26 6,954 05-24-2012, 07:39 AM
Last Post: Keith Midson
  HP71 Modified John W Kercheval 0 949 05-19-2012, 06:01 PM
Last Post: John W Kercheval
  HP-41C pcb connector upgrade Hans Brueggemann 6 2,567 05-19-2012, 10:17 AM
Last Post: aurelio
  About HP71 swap disks Olivier De Smet 5 1,861 03-17-2012, 07:42 PM
Last Post: Olivier De Smet
  41CL installation on machine with zebra strip David Ramsey 14 4,594 12-30-2011, 01:19 PM
Last Post: Monte Dalrymple
  Return of the 15C with Bad Zebra? aj04062 3 1,525 12-23-2011, 01:52 PM
Last Post: uhmgawa

Forum Jump: