HP-9114B Cassette Deck



#6

Does anyone repair these units? I have recently received one that will not pass the self test and when accessed from the HP-71 returns "LOOP BROKEN". Can anyone help with this?


#7

Some simple tests first

NB these are based on HP41 HPIL experience

Are your cables OK? Try looping them from one connector on the 71 to the other. The 71 shouldn't find the device, but it shouldn't report a broken loop either. (do this with each cable).

This should do a basic test of the 71 and the cables.

If this works, then start to suspect the Cassette drive HPIL interface (which you probably already do anyway :-).

There are a number of things that could have gone wrong. I have some vague details of how HPIL worked, but let someone else with experience help out here (all my stuff works, and if it aint broken...)

#8

The 9114 uses a sealed lead-acid cell as the power supply. If the cell is bad (expected in equipment this age), it is possible that the voltage supplied to the 9114 will vary as wildly as the output of an unfiltered rectifier. This will certainly cause the self-test to fail. Open the battery pack, take out the lead-acid cell, apply 6V (watch polarity) at the battery connectors (while having the battery case & connectors inserted into the 9114-- you figure out how to do this) and test the drive again. If it works, the culprit is the sealed lead-acid cell.


#9

I tried removing the Lead Acid battery and plugged the unit back in and still the Test light did not go off. Could this Battery also cause the "LOOP BROKEN" message? Does the battery have to be present for the unit to work or can the battery be removed and only use the charger 82059?


#10

If the unit has a Lead Acid battery then it has high current/power demands. Far higher than could be provided by the charger IMHO.

In addition the battery almost certainly acts to regilate the voltage. Having the charger plugged in without the battery could cause high and fluctuating voltages that could upset the unit (or worse)


#11

If you decide you need a battery you can get one from www.digikey.com for $16.36 +frt. This battery will also work in the HP-110


Possibly Related Threads...
Thread Author Replies Views Last Post
  How to copy files from 9114B to hard drive via PIL-box? Joe Horn 23 5,880 12-14-2013, 11:57 PM
Last Post: Geoff Quickfall
  Need service information for HP 82161A Cassette Drive Peter N1 2 802 07-14-2013, 04:11 AM
Last Post: Tony Duell
  OT: Sharp PC-1600 Cassette Files Bill (Smithville, NJ) 0 524 03-18-2012, 05:58 PM
Last Post: Bill (Smithville, NJ)
  [OT] Pens for SHARP CE-150 printer/cassette interface Miguel Toro 4 1,047 01-09-2012, 09:45 AM
Last Post: Klaus
  Interesting find: HP 9875A dual cassette drive David Ramsey 16 2,299 11-03-2011, 06:59 PM
Last Post: Eric Smith
  HP 9865a cassette tape drive Keith Lueck 2 610 11-01-2010, 11:20 AM
Last Post: Keith Lueck
  9114B Battery Replacement? Ángel Martin 4 970 04-12-2010, 03:31 PM
Last Post: Ángel Martin
  Query re. HP 82973A HP-IL Interface card and 82161A Digital Cassette Drive John AS (UK) 8 1,313 03-12-2010, 08:50 AM
Last Post: John AS (UK)
  Faulty disk drive in 9114B ? inaki 6 1,211 12-08-2009, 06:06 AM
Last Post: inaki
  Working on a 9114B HP-IL Disk Drive Gerry Schultz 5 1,180 09-24-2009, 01:10 PM
Last Post: Gerry Schultz

Forum Jump: