on nicads



#2

from the font of all knowledge:
http://www.straightdope.com/columns/read/349/do-nickel-cadmium-batteries-develop-charge-memory-if-not-fully-discharged

it sounded ok, with the exception of the damage he spoke of being the reversal of polarity and his not mentioning the possible wives tale which i heard: stating that the memory effect (or false memory effect) is not that the batteries won't charge fully - it's that they won't discharge fully.

i mostly use nimh cells now, so it's not a big deal to me. i just want to read what someone who knows a lot may write.


#3

Hi, db;

all I'd add about that is something mentioned by Katie Wasserman a couple of weeks ago: NiMH cells work better/live longer if kept charged at 60% +/-15% of their full charge, based on Prius battery regulation. Please, follow this thread; Katie's is one of the last two.

I sometimes find only NiCad's when searching for certain types, like the ones to rebuild the 82143A batteries (and related cases: Topcats, 82162A, etc.). I never found NiMH Sub-C batteries where I searched for them.

Cheers.

Luiz (Brazil)


Edited: 6 Aug 2010, 12:20 a.m.


#4

I've bought many from BatterySpace.com, mainly for rebuilding Roomba battery packs (with 12 cells in series, usually one or two die, bringing down the entire pack voltage enough that I get very little operating time from the robot).

-Tim

Edited: 6 Aug 2010, 2:24 a.m.


#5

I have hadsuch good reesults with Sanyo Eneloop low discharge AA cells I use them in most appliances. I used to have 2 4 station chargers on nearly full time, now one used rarely. I read there has been further improvement lately in the self discharge rate.
I use them in shells to substitute for D cells in one application where I get long life. I had a portable telephone that would lose it's nicad charge in 2 days. I bought some NiMh cells with tabs ans replaced them. They are satisfactory after years of use. Sam


Possibly Related Threads...
Thread Author Replies Views Last Post
  Care and Feeding of Topcat NiCads Les Wright 16 1,434 06-01-2012, 06:01 PM
Last Post: LHH
  Care and Feeding of New NiCads Les Wright 8 824 01-09-2007, 11:32 AM
Last Post: David Smith
  Replacement NiCads for HP82033A battery Tracy 1 344 12-22-2004, 12:20 AM
Last Post: Katie
  Sub-C NiCads from tool store Ellis Easley 0 241 03-26-2002, 11:24 AM
Last Post: Ellis Easley
  HP 41C replacing nicads / corroded contacts Mark Miller 6 677 08-01-1999, 05:59 AM
Last Post: Steve

Forum Jump: