Hp48G top plastic cover bent?



#5

Hi everyone,

I've just bought an HP48G and, after a detailed exam, I've found that the upper pastic cover seem apparently to be slightly bent in the top part:

http://img266.imageshack.us/img266/3025/topwlz.jpg

It forms a slight "U" shape.

Is it normal? Or maybe is it due to a misplacement of the top latches and/ or rivets?

Thank you very much, any help will be appreciated.


#6

Hola, Luis; ¿como estás?

I have some units with this case (HP48S/SX/G/G+/GX) and some of them have their edges 'lifted up' a little bit, as yours in the picture. I cannot tell for sure, but it seems to be normal.

Cheers!

Luiz (Brazil)


#7

Obrigado Luiz, thank you for your response. I didn't know wether it was a common effect in the 48 series or a particularity of this machine.


#8

I just looked at my GX and it looks similar.


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP-41 module covers and side port cover Nate Martin 1 180 12-02-2013, 01:51 AM
Last Post: Giancarlo
  HP67/97 M.E. Pac cover Ignacio Sánchez 2 215 11-22-2013, 04:04 AM
Last Post: Ignacio Sánchez Reig
  request M.E. pac for HP-67/97 wallet cover scan Ignacio Sánchez 0 152 11-06-2013, 09:36 AM
Last Post: Ignacio Sánchez Reig
  HP-41 Plastic Slide mbrethen 4 270 11-01-2013, 10:14 AM
Last Post: Kimberly Thompson
  HP-67/97 Mechanical engineering PAC cover Ignacio Sánchez 0 140 10-30-2013, 04:35 AM
Last Post: Ignacio Sánchez Reig
  [43S] Display and top row, refined Walter B 20 789 04-24-2013, 01:36 AM
Last Post: Walter B
  [43S]Top row poll (until Monday, 4.2.13, 13:13 UTC) Walter B 175 4,153 02-04-2013, 09:38 AM
Last Post: Andrés C. Rodríguez (Argentina)
  HP 50G battery cover replacement wildpig 1 117 08-03-2012, 11:53 AM
Last Post: Tim Wessman
  Another 3-D plastic printer Dave Shaffer (Arizona) 7 291 05-09-2012, 05:33 PM
Last Post: Pete Wilson
  HP48G Series Connectivity in a USB World Les Wright 3 209 05-06-2012, 01:29 AM
Last Post: Reth

Forum Jump: