HP97 box restore project (you may remember)



#2

Hi everybody

someone of you may remember I was working on a restoration

project of an HP97 box, received in bad conditions.

After I while, since the restoration was too hard for the results
I was getting, I have purchased a flat bad scanner,
and scanning the good parts, I have rebuilt the box.



What you see (look at it compared to a mobile phone size)





is a mock-up one third of the original size
The idea is then print this out in original size (I have worked on the original size with the scanner) on a self adhesive film, and then put it on the original box.
Actually I have scanned several rare boxes, mostly for HP accessories, should anybody be interested in these, I'll be more than happy to share those heavy files with everyone.
As always, feedbacks are welcome !
Enjoy your weekend, Alberto


#3

Ciao Alberto,

you are a real enthusiast! The box looks quite nice. Such small mock-ups might also be interesting to show the box besides the calculator in a showcase.

Next, buy a 3D scanner, scan the cases of some HP calcs and create transparent replica cases so you can see the innards ;-)

Take care,
Juergen


#4

ciao Jurgen,

well, actually I'm talking to some people in order to understand
I much would it cost a molded replica of a case ....
I'll keep you posted if I make any progress
I may have the printing on film done within the next two weeks,
is failry cheap, I have been talking to a company and the price
is about 35€ per each square meter of printing.
Since it is regardless of the number of objects you put on the surface, you can have ten or more mixed sizes boxes.
Then I'll post some photos of the results
Also, you can morph a 32E box into a more rare 34C box ...
take care my friend, Alberto


#5

I'm curious about the results, keep on your interesting work!

#6

Nice job Alberto!
I would be interested in your kind offer and, since we are both based in Milano (if I am not wrong) we could even meet in person to share our enthusiasm, and a beer too... ;-)

Greetings,
Massimo


#7

Hi Massimo,

that will be my pleasure, send me an email at alberto dot fenini at consys dot it, take care Alberto


Possibly Related Threads...
Thread Author Replies Views Last Post
  How to copy files from 9114B to hard drive via PIL-box? Joe Horn 23 1,825 12-14-2013, 11:57 PM
Last Post: Geoff Quickfall
  PIL-box w/o IL cable = paper weight Joe Horn 15 794 11-26-2013, 01:05 AM
Last Post: Les Wright
  FRAM71 Project aj04062 1 172 11-25-2013, 01:59 PM
Last Post: Hans Brueggemann
  [HP-PRIME] QPI project CompSystems 0 124 10-09-2013, 02:51 PM
Last Post: CompSystems
  Box left at HHC Tim Wessman 1 209 09-26-2013, 11:05 PM
Last Post: Wlodek Mier-Jedrzejowicz
  RPN-1200 Project Benoit Maag 0 125 08-25-2013, 01:05 AM
Last Post: Benoit Maag
  Slightly OT: Remember the extraction of the HP-35 ROM? Frank Boehm (Germany) 1 179 02-06-2013, 05:53 PM
Last Post: aurelio
  Disaster: help for a couple of HP97 needed! Jose Gonzalez Divasson 10 461 01-21-2013, 04:45 PM
Last Post: aurelio
  Looking for scans of a HP-19c Box ledudu 5 289 01-20-2013, 06:13 AM
Last Post: Lode
  What do you think of this project??? Pierre 1 158 11-21-2012, 06:58 PM
Last Post: Eddie W. Shore

Forum Jump: