New update for Clonix and NoV's users.



#4

Notes on the files for the Update270310 pack.

I've finally managed to achieve some of the pending tasks in order to build a few files that improve functionality for NoV's and fix a known bug of Clonix-D.

Here are some abstracts of the included files:

- CLR_RAM1.HEX & CLR_RAM2.HEX

These files improve the RAM erasing procedure on NoVRAM and NoV-32 modules respectively.

Burn the appropriate one into your module and plug it in your HP-41 (calculator must be OFF)

After some seconds (about 5sec. for NoVRAM and 10sec. for NoV-32) your calculator will power up automatically showing a message [CLR OK ] indicating that the erasing process has been successfully completed; or [NO CLR ] indicating that the process failed at some point.

Once your RAM is erased turn your HP-41 OFF, remove the module and reprogram it as usual.

In case you got the error message [NO CLR ] turn your calc OFF remove and reinsert the module to repeat the process. Make sure that your calc is running on a fresh set of alkalines.

If the problem persist, please mail me in order to find what the cause could be.

Note that the contents of the Stack is preserved during this procedure.

- ADDRS08p.asm

This file will allow NoV-64 users to take full advantage of Geir Isene's ICEBOX1H.ROM by enabling on-the-fly RAM blocks switching. Please visit his page for details on this outstanding piece of M-code. Here.

- Clonix-D.asm

Fixes an issue reported by several users which found that the ROM blocks did not switch as they should after changing the module from an odd to an even port or vice-versa.

Install this Update by including these files (replacing old ones when necessary) into your working directory.

Hope this helps.

Best wishes from the Caribbean Sea.

Diego.


#5

Me = Happy :-)

What's the next on the roadmap?

I have my wish list:

1. Ability to see two blocks of RAM to copy RAM pages between blocks

2. RAM2ROM for NoV-64

3. RAM clear for the NoV-64


#6

Hi Geir,

Thanks for the feedback and support.

I must say that your wish #3 is already accomplished. Please check your working directory, you should find the file "CLR_RAM4.HEX" which will clear your NoV-64 RAM in about 22sec. showing [CLR OK ] message afterwards. Let me know if you miss that file, and I'll mail it.

Regarding wishes #1 and #2, they're both in my to-do list. Along with the mods required for NoV-32 code to handle on-the-fly RAM chips swapping, as required for your ICEBOX1H.ROM (I didn't forget that one ;-))

Cheers from Dom. Republic.

Diego.


#7

Quote:
Hi Geir,

Thanks for the feedback and support.

I must say that your wish #3 is already accomplished. Please check your working directory, you should find the file "CLR_RAM4.HEX" which will clear your NoV-64 RAM in about 22sec. showing [CLR OK ] message afterwards. Let me know if you miss that file, and I'll mail it.


Then all is fine on #3 :-)

Quote:
Regarding wishes #1 and #2, they're both in my to-do list. Along with the mods required for NoV-32 code to handle on-the-fly RAM chips swapping, as required for your ICEBOX1H.ROM (I didn't forget that one ;-))

Great. When I get #1, I will send you a gift.


#8

:-)

Generous indeed from your side... any extra motivation is certainly welcome!! (not "required" whatsoever, but wholeheartedly appreciated)

You've got mail.

Diego.


Possibly Related Threads...
Thread Author Replies Views Last Post
  [HP Prime] Typo in English Users Guide Timothy Roche 2 982 11-15-2013, 04:10 AM
Last Post: dg1969
  HP-41 Clonix&NoV's SW Update. (For the non-Primer's guys out there... :-) Diego Diaz 21 4,030 11-13-2013, 09:00 AM
Last Post: Ángel Martin
  Explaination on How to Reset Caculator in Users guie: error Harold A Climer 5 1,642 10-15-2013, 02:11 AM
Last Post: cyrille de Brébisson
  Help me alert regular users to dangers to their calcs Bruce Larrabee 12 2,319 10-06-2013, 08:30 PM
Last Post: Bruce Larrabee
  [41CL] Another question for users Monte Dalrymple 28 5,266 06-03-2013, 10:04 AM
Last Post: Geir Isene
  HP-41CL & NoV(-64): Race condition? Geir Isene 11 2,274 05-03-2013, 01:59 PM
Last Post: Diego Diaz
  "HP RPN Calculator Users" group on LinkedIn Philippe Lasnier 6 1,664 04-27-2013, 03:27 AM
Last Post: BruceH
  [41CL] Question for users Monte Dalrymple 8 1,711 03-30-2013, 03:52 AM
Last Post: Didier Lachieze
  Warning: These are NOT Clonix! Diego Diaz 11 2,212 03-02-2013, 01:15 PM
Last Post: Diego Diaz
  This is for the German users of the HP 50g Software49g 13 2,516 02-18-2013, 07:14 AM
Last Post: Software49g

Forum Jump: