HP 67 battery charger



#4

Can anyone provide a specification or circuit diagram for building a battery charger for the HP67?

Many thanks,

-Paul


#5

I'd actually buy an existing stabalised supplyand change that. The only additional component you need is a current limit resistor and a power diode. The important operating voltage is that that runs the calculator which needs to be set accurately at 3.75 to 4 volts. The additional diode and resistor can be used to form a charging circuit direct from the secondary of the transformer. I'd choose the resistor to pass C/10 to C/15. (C=Capacity of cell).


#6

Also see http://www.hpmuseum.org/batts/battery.htm


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP-67 charger Marcel Samek 3 1,164 11-22-2013, 10:45 PM
Last Post: Marcel Samek
  HP charger 82002c for handheld calculators Dave Burson 2 970 05-19-2013, 12:51 PM
Last Post: Dave Burson
  Classic (HP-67) charger issues revisited Matt Agajanian 6 1,535 05-20-2012, 10:50 PM
Last Post: Matt Agajanian
  HP-35 Charger/Adapter Repair (82002C) LHH 0 642 05-19-2012, 01:21 AM
Last Post: LHH
  HP 67 Calculator Battery Terminal plus/minus Steve E. 6 1,510 04-30-2012, 03:29 PM
Last Post: Nick R
  aOT--Battery/battery contact care advice needed Matt Agajanian 0 725 04-24-2012, 07:35 PM
Last Post: Matt Agajanian
  HP-67 wall charger Wytnucls 2 896 04-19-2012, 10:13 PM
Last Post: Dan W
  HP-67 Battery door latch Matt Agajanian 23 3,805 04-13-2012, 01:57 PM
Last Post: Matt Agajanian
  HP 97 charger Harald 2 841 03-30-2012, 02:01 PM
Last Post: Harald
  Which charger for a35 Matt Agajanian 3 964 03-23-2012, 02:58 AM
Last Post: Marcus von Cube, Germany

Forum Jump: