Opening HP41C



#2

Hi all, I'd like to clean and repair my newly arrived HP41C, particulary the Enter key, that is firm on the left side, but is weak on the right side of the button. I tried to open the unit, but it looked to me the keyboard unit is much like the woodstock one, soldered and tied together. Is there any way of disassembly the keyboard and get access to the underneath surface ? Thank you very much for help, Alberto


#3

Ciao, Alberto;

as you mentioned, the keyboard is locked in place by melting plastic posts. The only way I know is to cut the borders of each one. I am trying small screws, like the ones used in glasses, to fix the keyboard in place after removing. Will talk about this later and add some pics, now I have to leave...

Cheers.

Luiz (Brazil)


#4

I have successfully disassembled the 41 keyboard by "popping" off the top of the heatstakes with a small screw driver. The plastic that comes off is kinda donut shaped. By doing this instead of shearing off the whole top of the heatstake with a knife, the centre of the heatstake remains. To reassemble, I use "hot" glue, while maintaining pressure on the keyboard from behind.

I actually squish down the glue with my finger (after licking it first) to set the glue quicker and force a little more around the heatstake.

I have done this on five or six 41 calcs now and it works a treat !!

Cheers,
John


Possibly Related Threads...
Thread Author Replies Views Last Post
  opening hp 15c for repair FORTIN Pascal 4 425 10-12-2013, 10:35 AM
Last Post: FORTIN Pascal
  How to check / repair a HP 82106A module for HP41C calculator ? Eduardo Mingo 13 929 01-07-2013, 11:05 AM
Last Post: Diego Diaz
  A simple question about the HP41C or HP41CV Antoine M. Couëtte 6 548 12-16-2012, 04:06 AM
Last Post: Antoine M. Couëtte
  HP41C repair ? Michael Paul 4 427 09-30-2012, 11:26 AM
Last Post: db (martinez, ca.)
  A cheap HP41C for sale...........999 EURO only aurelio 4 442 06-04-2012, 03:46 PM
Last Post: jerome ibanes
  HP41C: Factorial (kind of) in MCODE Frido Bohn 7 604 05-26-2012, 09:18 AM
Last Post: Frido Bohn
  Picture of HP41C from "The Dream is Alive" Christopher Johnson 0 204 04-20-2012, 02:38 PM
Last Post: Christopher Johnson
  opening HP 30B Harald 6 497 02-26-2012, 09:07 AM
Last Post: Marcus von Cube, Germany
  HP41C "Power Module" Frido Bohn 10 690 01-03-2012, 03:35 PM
Last Post: Geir Isene
  HP Time Module+Overlay! 82182A for HP41c robertoataulfo 1 254 01-01-2012, 12:33 PM
Last Post: Howard Owen

Forum Jump: