HP-25 battery pack



#2

I recently acquired another HP-25, actually in working condition, minus the battery pack. Does anyone know where I could buy a replacement battery holder? I don't need the batteries as AA NiMH batteries work just fine.

Failing that has anyone built one from scratch?


#3

I've thought about trying to cast these in polyethylene resin for my use. Would there be a wider interest? I've only got two woodstocks & one battery holder. However one of the calculators isn't 100% reliable so my motivation isn't high.

Prices at auction for obviously broken calculators with intact battery holders seem insane.


- Pauli


#4

Good idea Paul!

I thought of making some kinda mold and casting my own, but didn't know what plastic to use. So if you make some I'd be happy to buy one or two off you!

Another idea I was toying with was to make one out of hardwood. It'd be slow, but with patience I reckon you could to it. Wood would be strong enough for the job easy. I'd make for a special looking battery pack too!


#5

I'd use Easycast if I ever do do some. It should be strong enough and it is quick and (relatively) painless to use. If it isn't up to the task, at least the moulds would be ready for experimentation with other casting compounds.

Wood sounds like a very interesting idea. It would be very slow and painful I expect. I've done plenty of woodworking but not any wood carving so I'd rate it beyond my current skill set.


- Pauli


#6

This could be a solution; if only we could get Jay into old calculators. If not; my suggestion would be to wait a couple of years till this technology is at every street corner. When 3d printing becomes available at affordable prices it will change everything.


#7

I believe this works only with solid pieces, as you must scan the exterior surfaces on all sides. In the case of the battery pack, as a minimum you would have to split it into 2 separate parts. Also, you would have to fabricate a spring to maintain pressure on the electrical connection with the fixed contacts on the calculator and to provide continuity with the two battery cells. Quite complicated, actually.


#8

Casting the battery pack will require two pieces and the spring too.

- Pauli

#9

Wood it is then!

It'll be fun even if it doesn't work out. Everyone needs a summer pastime. This one is mine. Too hot outside for much else.

#10

The thing about Woodstocks is that swapping out a battery pack is super easy, so I simply share among the various models, except the HP-25c and HP-29c so that I don't lose the programs.


#11

Would be great to get Woodstock battery cases, however, I am afraid, tooling for plastic injection is pretty expensive. Since I am in the same situation - more Woodstocks than battery cases - I help myself with handmade cases from standard AAA battery cases, which are cheap. With basic tools they can be converted into a Woodstock battery case, not so beautiful, but functional.

Andreas


Edited: 28 Nov 2009, 8:33 a.m.


#12

Do these stay in without tape?

I wouldn't injection mould - way too expensive. Making a mould out of silicon rubber is pretty straightforward and casting in polyethylene resin also.

- Pauli


#13

Paul,

No tape, the battery cases are just kept in place by the spring force. A mechanical lock as with the original ones would be better of course, some day I try.

Andreas

Edited: 29 Nov 2009, 5:05 a.m.


Possibly Related Threads...
Thread Author Replies Views Last Post
  Strange HP 25 Problem (Repair) Onur Ilkorur 5 297 12-06-2013, 05:13 PM
Last Post: Onur Ilkorur
  HP-25 Wayne Selway 1 152 11-22-2013, 12:58 PM
Last Post: Michael de Estrada
  Interesting Base Conversions - Porting a 1975 HP 25 Program to the HP 35S Eddie W. Shore 1 159 10-13-2013, 07:49 PM
Last Post: BruceH
  HP-25/25C Potential Matt Agajanian 14 561 07-17-2013, 02:57 AM
Last Post: Matt Agajanian
  HP 50G Multi Lingual Pack – Polski Software49g 3 185 04-10-2013, 10:40 AM
Last Post: Massimo Gnerucci (Italy)
  Recharging original batteries in HP 45, 65 and 25 Michae Altmann 1 141 03-05-2013, 12:21 AM
Last Post: DavidShenk
  HP-25 keyboard Brad Barton 5 234 02-16-2013, 09:59 PM
Last Post: Brad Barton
  HP 65/25 shout-out in interview with Paul Lutus Egan Ford 3 190 12-21-2012, 11:09 PM
Last Post: Mike Morrow
  HP 41 Battery Pack Rebuild John Ratard 0 583 09-29-2012, 01:37 PM
Last Post: John Ratard
  HP-41 Quiz: How to pack 100k in ROM? (on-line) Ángel Martin 10 416 09-02-2012, 10:35 PM
Last Post: Luiz C. Vieira (Brazil)

Forum Jump: