W&W RAMBOX 64K with DIP-Switches



#2

I recently saw a W&W RAMBOX II 64KB Version with three 8*DIP switches at bottom of the card reader housing. I was wondering about this, because the German RAMBOX II manual does not describe any DIP-Switches. These switches are for example described in the English manual of the W&W RAMBOX 32KB Version.

A HP41 specialist was quite surprised about the existence of such a W&W RAMBOX.

My question, has anybody seen a W&W RAMBOX II 64KB Version with DIP switches also?

From what I read so far, I assume that the W&W RAMBOX 32KB Version exists in two versions, one with dip switches, one without.

Can anybody confirm this?

So it seem that from the RAMBOX II also exist two hardware versions?

Cheers

Christoph


#3

I can only confirm that there is a W&W RAMBOX 32KB _with_ dip switches as it is the only one I have.

Cheers,

Juergen


#4

I also have one with DIP switches, 3 rows of 8 switches,

Meindert


Possibly Related Threads…
Thread Author Replies Views Last Post
  Prime: Program size limited to 64K? Erwin Ried 4 2,076 11-17-2013, 11:42 PM
Last Post: Joseph Ec
  HP lucky dip Keith Midson 6 2,045 05-12-2013, 06:40 AM
Last Post: aurelio
  HP 9826A key switches David Ramsey 3 1,400 01-04-2012, 07:29 PM
Last Post: David Ramsey
  Did HP or any 3rd party make a 64K card for the 48 series? mr-scorpio 2 1,161 07-22-2011, 11:50 PM
Last Post: Martin Pinckney
  INIT-Module for ERAMCO RSU-2 Rambox PeterP 3 1,393 02-19-2009, 03:09 AM
Last Post: christoph klug
  Op-Amp Gain and Offset Design for the HP-67 Stefan Vorkoetter 6 2,230 12-05-2008, 10:57 AM
Last Post: Tom Mathes
  ERAMCO RSU RAMBox - Battery Replacement Dan Grelinger 9 2,803 03-27-2008, 11:09 PM
Last Post: PeterP
  AMP Rom for 71b PeterP 5 1,980 12-06-2007, 02:20 PM
Last Post: PeterP
  Adv+CCD+Games in 41CY or Rambox PeterP 6 2,119 12-03-2007, 10:32 AM
Last Post: PeterP
  Rambox battery replacement Prabhu Bhooplapur 3 1,589 10-20-2007, 05:55 AM
Last Post: Antoine M. Couëtte

Forum Jump: