HP 16c - needs cleaning?


I just received an HP 16c in cosmetically VG condition. It works fine, too ... except that the ENTER key has a strange, reluctant, "mushy" feel to it, almost as if there is dirt in there or something.

I have never opened a calculator in my life. How difficult would it be to open this unit up and clean it? And what is a safe method of cleaning?

Maybe I should just send to fixthatcalc, even though they have a big backlog/wait period.

Advice is welcomed. %^D



I don't want to sound fatalistic about it, but from what I've learnt through recent experience of opening an 11C, I'd advise against attempting this as it is a seriously major job that involves breaking certain elements of the calc's construction.

My thread is just a few below this one:


It contains some sage advice from other members as well as links to various pages with pictures and instructions. Access to the keyboard involves breaking over 40 "heat stakes" that hold the main PCB to the keyboard assmebly. If I was going to try this, I wouldn't do it on any Voyager that is in good condition!

I am sure that more experienced members can add to this to verify what I've written.

Indicentally, I used to have a 16C with a mushy On key yet never had mushy keys on my other Voyagers. Is this a strange feature of 16Cs?



Darn. Well, I wrote fixthatcalc -- we'll see what they say. Thanks for the response.


Actually, FixThatCalc is a contributor to this forum, so maybe he will respond to you here later today.


Got a nice informative email from FixThatCalc re: the 'feel' of the ENTER key. Apparently it is due to the construction of the longer key & is quite normal.

But I was just playing around with the lil' beast and the display blanked out & doesn't appear to want to return. I'm hopeful it is just a matter of batteries, but who knows ... :(



... not batteries.

I checked the "Self Tests" section of the manual and pressing 'D' and 'ON' simultaneously, then releasing them, brought the monster back.


Regarding the "heat stakes" and breaking/removing them, has anyone tried melting them with a fine-tip solder iron? I am just wondering off the top of my head if it is possible to soften the plastic to make it easier to cut the "head" off and when it comes to reassembly, using a pastic adhesive to re-seal them? Feasable or not?



I tried it with a HP-71b. I used a swiss army knive. Push the blade under the heatstake, then twist the knive. The edge of the mushroom-form will break off, but the center will remain intact. That means that after this procedure, the heatstakes are still as high as they were before, only the diameter of the mushroom head is reduced.

I put some foam in the case back to apply pressure towards the keyboard, works good enough now for me. I thought about re-melting a few heatstakes, there seems to be enough material left for that, but I did not test it.


Thanks for describing that. Using foam as padding sounds like quite a sensible way of doing things and keeps it possible to do future maintenance without having to break re-sealed heat stakes.


Possibly Related Threads...
Thread Author Replies Views Last Post
  Bought a 16C to compensate a little Eelco Rouw 23 5,085 12-07-2013, 01:26 PM
Last Post: Eelco Rouw
  Shiny new 16C! Keith Midson 7 1,690 10-27-2013, 02:22 AM
Last Post: Keith Midson
  Joys of eBay: HP-32S, HP-32SII, HP-42S, HP-16C, ... Sasu Mattila 7 1,675 09-23-2013, 04:39 PM
Last Post: Julián Miranda (Spain)
  Cleaning old slide rules aurelio 3 1,345 09-18-2013, 03:25 PM
Last Post: aurelio
  Cleaning exiting library programs patryk 2 858 09-14-2013, 12:36 PM
Last Post: patryk
  HP-16C simulator fhub 12 2,491 06-30-2013, 10:14 PM
Last Post: Robert Prosperi
  Program for HP-16c... Leonid 9 1,950 06-07-2013, 08:51 PM
Last Post: David Hayden
  HP 11C/12C/15C/16C case Philippe Cairic 4 1,455 11-06-2012, 06:04 PM
Last Post: Matt Agajanian
  Understanding HP-16C integer division Jimi 18 3,569 10-16-2012, 09:13 PM
Last Post: Eddie W. Shore
  Woodstock/Spice Keyboard Cleaning Revisited Matt Agajanian 0 654 05-12-2012, 03:43 PM
Last Post: Matt Agajanian

Forum Jump: