My new traction system for Topcat printers.



#5

This is my last and, I hope, final work on the Topcat's printers traction system.
How you can see, I have removed the original stuff wich was the wheel traction,
its plastic support and I have created a support groove for the o-ring.

Original wheel.

After wheel stuff removing.

You can see only the plastic support.

Grooved!

And finally, the new wheel!

On my HP-97 the system work very well, even after weeks of not using the printer does not overlap the printed lines and drag the paper in the right way.
Only the line density has fallen from 6.2 to 5.9 lpi.
For those wishing to experience this change, the o-ring measures are:
- outer diameter 8.5 mm;
- internal diameter 4.5 mm;
- thickness 2.0 mm

I apologize for my bad english and I hope you have improvements
to be proposed, thanks in advance.

I wish you good job!

Ignazio


#6

Well done!

Can you point me to the printer disassembly instructions somewhere? I know it's not trivial.

How did you do the modifications to the plastic parts? Which tools have been used?

Marcus


#7

Thanks Markus,
I don't know where and if you could find the instruction, I have used only the exploded view showed in the Service Manual of the HP-97 and I tried to do it.

These are the parts of the printer, disassembled:

Disassemble the printer is not particularly difficult, you must pay attention to the thermal-head flat cable.

The tools do you need are a exacto knife and a hacksaw blade for the groove; it is not necessary to use adhesives to fix the o-ring.

Sure, it takes a lot of patience and attention. Before making this type of job, I have always completely dismantled printers to be able to clean and lubricate better.

Regards and thank you for your interest.

Ignazio


Edited: 6 May 2009, 11:27 a.m.


#8

Thanks for the posting,

Geoff


Possibly Related Threads...
Thread Author Replies Views Last Post
  PRIME: re-format the flash drive to recover the operating system Harold A Climer 2 687 11-06-2013, 12:22 AM
Last Post: Michael de Estrada
  HP Prime Solving Nonlinear System of Equations for Complex Results Helge Gabert 11 1,774 09-30-2013, 03:44 AM
Last Post: From Hong Kong
  41 System DEMO Module - Update Ángel Martin 0 363 10-21-2012, 07:27 AM
Last Post: Ángel Martin
  Big ROM - 41 System DEMO ROM Ángel Martin 5 968 10-16-2012, 05:28 AM
Last Post: Ángel Martin
  HP-41 System DEMO Ángel Martin 4 707 10-08-2012, 05:38 PM
Last Post: Ángel Martin
  HP-41CV System II aj04062 1 499 06-22-2012, 08:49 PM
Last Post: Allen
  system of equations question Don Shepherd 19 1,907 06-11-2012, 11:23 AM
Last Post: Namir
  Care and Feeding of Topcat NiCads Les Wright 16 1,562 06-01-2012, 06:01 PM
Last Post: LHH
  Topcat Battery Polarity Les Wright 2 525 05-30-2012, 07:23 PM
Last Post: Les Wright
  41CL & EMU41 & IL2000 interface system Christoph Klug 0 346 03-22-2012, 05:23 PM
Last Post: Christoph Klug

Forum Jump: