R/S key slightly slanted in 35s



#2

Hi guys,

I have noticed that the R/S key in my new HP 35s is slightly slanted to the rigth side. It is not very noticeable unless you stare at. However, If I touch its surface, comparing with the adjacent GTO key, it is a bit more depressed and certainly sloped to the lower right side.

Could you please check that in your machines so as to know if it's an isolated case or if it's a common fabrication issue in this model?

Thanks,


#3

Each key on my HP 35s is as perfect as can be.


#4

So is mine. BTW, I doubt *staring* at calc keys is helpful at all. AFAIK it won't bring up the missing labels (RE<>PO, RL<>CX) nor reorder the top 3 rows etc.

#5

I have complained about other keyboard problems with the 35s but I had not noticed the problem that you mention. When I looked really, really close at the keyboard I didn't see it on my 35s. I did see that the double-width ENTER key may have a slight tilt either to the left or to the right if I don't press the key in the center. But the effect is so small that it doesn't affect my use of the calculator at all.

For real keyboard problems consider my 41CV where the 7 key has absolutely no tactile feedback even though it enters properly, or my old 67 where the entire right hand column of keys has reduced tactile feedback.

Palmer


Possibly Related Threads...
Thread Author Replies Views Last Post
  Slightly OT: Remember the extraction of the HP-35 ROM? Frank Boehm (Germany) 1 229 02-06-2013, 05:53 PM
Last Post: aurelio
  Only slightly OT: HOW TO Setup SVN+SSH on Windows® Marcus von Cube, Germany 3 290 12-24-2012, 04:53 AM
Last Post: Walter B
  Not just slightly ahead of its time. Matt Agajanian 17 761 08-16-2012, 01:17 AM
Last Post: Steve Leibson
  30B TVM slightly different results bill platt 5 330 03-26-2012, 11:21 AM
Last Post: bill platt
  PPC DVD HP-Calc Archive Disk "Slightly" Updated Jake Schwartz 26 1,069 09-02-2011, 02:11 PM
Last Post: Howard Owen
  Slightly OT: simple math dilemma Chuck 14 702 04-13-2011, 11:44 PM
Last Post: Manolo Sobrino
  Only slightly off-topic Dusan Zivkovic 3 224 08-25-2010, 10:30 AM
Last Post: Egan Ford
  TI-30 durability testing (slightly off topic, BTW). Michael Meyer 4 291 08-04-2010, 05:23 PM
Last Post: Martin Pinckney
  6114A power supply initial price (sorry, slightly OT) Marc Ferrer (France) 4 252 06-12-2010, 01:22 PM
Last Post: Marc Ferrer (France)
  Searchable PDFs/HP41 manual/Slightly Off Topic Kevin Kitts 13 613 09-09-2009, 11:42 PM
Last Post: David Hayden

Forum Jump: