HP 41 CX cardreader problem



#6

I have problems with my 41CX cardreader. It has gotten some sticky liquid in it, and it smears the cards badly with an error message.
Can anyone explain how to fix it, or shall I just send it to FixThatCalc for repair?

Cheers, Matti Sweden


#7

This problem is commonly known as "gummy wheel". There's an article on fixing it on the forum:

HP 41 Card reader Repair

If you're not comfortable doing it yourself, you can have it done professionally.

MikeO

#8

Hello Matti,

More than likely the drive wheel material in your card reader has broken down, and deteriorated into a gummy sludge. This is a common problem in the card readers of all early HP machines and is due to age.

There are two sets of directions (from two different people) that describe the repair procedure here.

Good luck, and best regards, Hal

#9

You will need either the fuel line tubing or the O rings to replace the gummy wheel.

I have repaired two of these in the past month and they work great!!!

You can get the O rings from this gentleman on ebay:

Wheel Rings

Hope this helps.


Edited: 6 Sept 2008, 12:30 a.m.

#10

OK,
and Thanks to all respondents!

/Matti


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP-41(CL): The easiest way to transfer FOCAL programs from a Linux PC to the HP-41 Geir Isene 13 1,929 12-05-2013, 02:40 AM
Last Post: Hans Brueggemann
  Trading TI Nspire CX CAS for HP Prime Justin Sloan (Honolulu) 2 436 05-09-2013, 04:22 AM
Last Post: Chris Smith
  HP 41 CX Celso Cipolato 2 437 09-30-2012, 06:38 PM
Last Post: Thomas Klemm
  Killed my 41-CX Halfnut aj04062 7 840 07-10-2012, 07:47 PM
Last Post: Luiz C. Vieira (Brazil)
  I am back ;) with a problem on HP 41 ;( wildpig 7 820 07-09-2012, 11:30 AM
Last Post: Mike Morrow
  Interesting TI Nspire CAS CX programming features Namir 5 687 04-15-2012, 04:11 PM
Last Post: Namir
  Impressive TI NSpire CX CAS Multiple Integration Namir 43 3,465 12-23-2011, 05:24 AM
Last Post: Thomas Klemm
  41-CX with 'Creeping LCD Disease' Tim C 12 1,073 11-03-2011, 01:55 PM
Last Post: Randy
  Experience (Learning) Curve Program for HP-41C/CV/CX Chris Catotti 1 387 09-20-2011, 01:46 PM
Last Post: Frido Bohn
  Why I like the blank overlay option for the 41C, CV, CX & CL and my 41CL final configuration Geoff Quickfall 1 331 06-18-2011, 03:18 AM
Last Post: Geoff Quickfall

Forum Jump: