Upper rubber feet on the HP 35s



#9

Why are they placed on the battery cover?

I'm not happy with this design, HP should have placed the upper rubber feet on the back of the calculator's case to avoid rattles. IIRC on the HP 33s (and other HP calculators) they are placed outside the battery cover.


#10

What does rattle? The batteries inside? The cover? The calculator itself while you are using it?

Mine does not rattle at all...


#11

Mine does. The battery door doesn't fit as tight as it should. Not much of a problem to me, though.


#12

This reminds me that mine was also rattling when I got my 35S. I've solved this by adding a small piece of transparent Scotch tape on the small tab at the bottom of the battery cover to increase it's thickness a little bit. Now the battery cover is perfectly locked in and doesn't rattle anymore.
Simple and cheap fix and I'm fully happy - to a point where I forgot this issue.....
Anyway getting a rattling cover is a bit disappointing on an hp calculator, even with today's low cost production standards.

Edited: 11 Aug 2008, 12:09 p.m.


#13

Right. And thank you for presenting your nice fix, I'll try it. Concerning quality expectations: Keys that click but doesn't register are *really* a problem, and after that has been reported here, I'm so happy with my working 35s keyboard that I don't even think about the battery door being an issue ;-).


#14

So far my keyboard is working fine...

#15

I was referring to the battery cover. It is the only flaw that I've found.

Other than that I'm very pleased with this calculator, my third HP calculator ever (after a HP 31E and a HP 48g).

#16

Despite the shortcomings of this calculator (abundantly documented elsewhere on this forum), I find the physical design of the 35s to be rather well done, albeit in too large a package. Also, Spice series calculators had the upper feet on the battery door. They didn't rattle either.


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP Prime Error: Summation Upper Bound > 1000 HP Pioneer 2 346 10-25-2013, 11:32 AM
Last Post: steindid
  HP41 Upper Screw Well Busted Colin Verrilli 6 454 07-16-2012, 08:45 PM
Last Post: matt kernal
  [WP34S] Improving the Upper-Tail F and Chi-Square Les Wright 7 557 05-12-2012, 06:31 PM
Last Post: Paul Dale
  15C LE keyboard fixed, plus: about the feet Dale Reed 2 260 01-15-2012, 04:24 AM
Last Post: Reth
  Classic Calculator Feet/Latch aj04062 0 173 03-06-2010, 05:57 PM
Last Post: aj04062
  Woodstock feet replacements? Michael Meyer 6 457 10-09-2009, 05:15 AM
Last Post: Vieira, Luiz C. (Brazil)
  rubber bands hp 41 ulisse-quadri 1 224 07-12-2009, 02:14 PM
Last Post: Ignazio Cara (Italy)
  Removing rubber feet from HP27S Strath Clarke (Sydney, Australia) 4 360 02-10-2009, 06:13 AM
Last Post: Strath Clarke (Sydney, Australia)
  HP-41CX Zengrange: remove rubber fragments Rainer Wiedemann (Germany) 0 205 01-29-2009, 07:32 PM
Last Post: Rainer Wiedemann (Germany)
  Woodstock feet-- any good replacement? Michael Meyer 3 305 09-11-2008, 11:49 PM
Last Post: Les Wright

Forum Jump: