HP-41 system question



#2

Does anyone know if any other peripheral select addresses

beside the ones that I know about (FB - timer, FC - card

reader, FD - display, FE - wand, 10 - halfnut display)

are used? In particular, what about the HP-IL adapter

or any of the printers? I want to avoid any potential

conflicts with something that I am thinking about designing.

Thanks,
Monte


#3

Have you checked the SDK41 manual on TOS?

HTH

Raymond

(TOS = Warren Furlow's calculator site, linked from here;-)


#4

Yes, that's the first place I checked.

Thanks,
Monte

#5

HP-IL, the 82143A, and the 82442A don't use peripheral select.

HP originally chose addresses Fx because they could do an "ldi 3fx" followed by a ram slct and a perf slct, in order to disable RAM and enable the peripheral. This worked because there wasn't RAM at addresses 3Fx. As a result when they introduced the Extended Memory modules, they had to omit addresses 2Fx/3Fx from those modules.

With the halfnut LCD controller, they apparently decided that the same idea would work for addresses 010 through 03f.

If you don't need to use the same constant for both disabling RAM and enabling your peripheral, you could use almost anything other than 10 and fb through fe.


#6

Okay, I just wanted to make sure that I didn't step on something
that already existed.

So that means that the peripheral flags are dedicated to a specific
function and are not conditioned by the peripheral select. In the
SDK41 documentation it implies that only peripheral flags 0, 3,
4, and 5 are not committed? But perhaps 0 and 5 are used for
something with the zenrom since these two have mnemonics in the
"zencode" column?

I was hoping to use a pair of peripheral flags to signal status
for my design, but perhaps I'll have to use a data read instead.

Thanks,
Monte


#7

Of the 14 possible peripheral flags, only flags 3 and 4 were not assigned to any released HP product. Here's a table from my working notes:


flag    test
num opcode device mnem expansion
---- ------ ------ ----- ------------------------
0 3ac 82143A ?PBSY Printer BuSY
1 32c 82104A ?CRDR CaRD Reader
2 22c 82153A ?WNDB WaND Byte available
3 02c none ?PF 3
4 06c none ?PF 4
5 0ac 82242A ?EDAV Emitter Diode AVailable
6 16c 82160A ?IFCR InterFace Clear Received
7 2ac 82160A ?SRQR Service ReQuest Received
8 12c 82160A ?FRAV FRame AVailable
9 26c 82160A ?FRNS Frame Received Not as Sent
10 0ec 82160A ?ORAV Output Register AVailable
11 1ac 82182A ?TFAIL
12 36c 82182A ?ALM ALarM
13 2ec all ?SERV SERVice

I would strongly advise against using more than one flag for a new device. These flags are only intended to be used to quickly identify conditions that awaken a 41 from light sleep, so it is reasonable for a device to use one of them, but to further distinguish which condition of that device resulted in the wakeup, data should be read from the device.

HP chose to use up five of the scarce flags for HP-IL, but that probably seemed like a reasonable use of the scarce resource because it was expected that almost all further peripherals would use HP-IL rather than dedicated interface modules.


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP-41(CL): The easiest way to transfer FOCAL programs from a Linux PC to the HP-41 Geir Isene 13 1,943 12-05-2013, 02:40 AM
Last Post: Hans Brueggemann
  PRIME: re-format the flash drive to recover the operating system Harold A Climer 2 590 11-06-2013, 12:22 AM
Last Post: Michael de Estrada
  Non-Prime question alert: Hp-41 and synthetic instructions Marcel Samek 11 1,434 11-04-2013, 09:31 PM
Last Post: sjthomas
  HP Prime Solving Nonlinear System of Equations for Complex Results Helge Gabert 11 1,498 09-30-2013, 03:44 AM
Last Post: From Hong Kong
  41 System DEMO Module - Update Ángel Martin 0 293 10-21-2012, 07:27 AM
Last Post: Ángel Martin
  Big ROM - 41 System DEMO ROM Ángel Martin 5 829 10-16-2012, 05:28 AM
Last Post: Ángel Martin
  HP-41 System DEMO Ángel Martin 4 595 10-08-2012, 05:38 PM
Last Post: Ángel Martin
  41 User Memory vs System Memory Gerry Schultz 6 833 07-01-2012, 12:02 AM
Last Post: Monte Dalrymple
  HP-41CV System II aj04062 1 418 06-22-2012, 08:49 PM
Last Post: Allen
  hp 41 series wire-wrapped connector question. Matt Kernal 3 521 06-19-2012, 01:48 AM
Last Post: Luiz C. Vieira (Brazil)

Forum Jump: