HP 48G unit conversion



how do I convert compound units e.g. miles per gallon to kilometers per liter?

i did some search but found only how to convert the HP 48g predefined units (e.g. knots to miles per hour, because there is a menu tab for mph)

Thanks in advance for any help.

hpnut in malaysia

Edited: 6 June 2008, 11:45 a.m.



I just found the answer here ;-)


Metric Conversions on the Calculator

HP 48G

(GRN stands for the green or right arrow, PRPL stands for the purple or left arrow)

Access the UNITS menu (GRN 6). Use the menu keys (the white keys on top) to access the desired quantity. Push NXT to get more choices. Accessing a quantity with the menu key displays a list of units for that quantity. For example, pushing the menu key under LENG results in a list of units of length. The others display similar lists. We'll use length as our example here.

Converting between two units that are both listed (for example, convert 0.0715 inches to micrometers): First, get the units displayed on the menu bar as described above. Next, enter 0.0715, then push the menu key for IN, then push NXT three times until "µ" is visible, then push PRPL followed by the menu key for "µ". Presto, the answer is 1816.1 micrometers.

Converting from an unlisted unit to a listed unit (for example, convert 4.75 x 1010 picometers to centimeters): Get the unit cm displayed on the menu bar, then enter 4.75 x 1010, then GRN followed by the times button (this enters an underscore immediately after the exponent), then lower case p (alpha PRPL P), then lower case m (alpha PRPL M), then ENTER, then push PRPL followed by the menu key for centimeters. Presto, 4.75 cm. The calculator understands all the metric prefixes listed in Table 1-5 of the text, plus many others. (To get µ, push GRN STO). It properly distinguishes between mega and milli if you use M and m, respectively.

Converting from a listed unit to an unlisted unit (for example, convert 4.75 cm to picometers). The easiest way I've found is to enter 4.75_cm using the units menu, then enter 0_pm (0 GRN, then the times button, then alpha PRPL P alpha PRPL M ENTER), then push the add button.

Temperature conversions: As long as the temperatures are actual temperatures and not temperature differences, you can proceed as above. For example, in converting -35 oC to oF and K, simply access the temperature units in the units menu, then enter 35, then change the sign, then push the menu key for oC, then push PRPL and the menu key for oF (gives -31 oF), then PRPL and the menu key for K (and get 238.15 K). If, however, the temperatures represent temperature differences, such as a temperature change of -35 oC, then you have to proceed differently. See the manual for specific applications.


Here is simple way to convert 1 MI/GAL to KM/L on the HP48G series:

1. Enter '1', followed by Right-Shift "Units"
2. Choose the left-most button (A) corresponding to LENG on the Soft Menu
3. Press NXT and select MI or right-most button (F)
4. Enter '1', followed by Right-Shift "Units"
5. Choose the third button (C) corresponding to VOL on the Soft Menu
6. Press NXT and select GAL or fourth button (D)
7. Press DIVIDE (/) and you get 1 MI/GAL
8. Repeat the above procedure (modified accordingly) to obtain 1 KM/L
9. Press Left-Shift "Units"
10. Select CONV or left=most button (A) - Ans: 0.42514 km/l

Possibly Related Threads...
Thread Author Replies Views Last Post
  HP 35s polar/rectangular conversion CD Dodds 6 1,293 11-28-2013, 02:39 PM
Last Post: Dieter
  [WP 34s] Pressure Conversion Factors Timothy Roche 8 1,642 11-04-2013, 07:17 PM
Last Post: Dave Shaffer (Arizona)
  More programs for polar-rectangular conversion on HP Prime Michael de Estrada 4 1,080 11-04-2013, 12:43 AM
Last Post: Michael de Estrada
  Unit circle on HP Prime Mic 2 681 08-28-2013, 05:22 PM
Last Post: Thomas Klemm
  HP Prime: Conversion factors Paul Townsend (UK) 19 2,464 08-27-2013, 09:19 AM
Last Post: Nigel J Dowrick
  Riemann's Zeta Function update (HP-28S, HP-48G/GX/G+, HP-49G/G+/50g) Gerson W. Barbosa 0 548 06-30-2013, 01:01 AM
Last Post: Gerson W. Barbosa
  OT: DIFFERENTIAL EQUATIONS using the HP-48G/GX Ivan Rancati 2 756 06-04-2013, 04:11 AM
Last Post: Frank Boehm (Germany)
  Unit conversions inside programs on 50g Chris Smith 2 701 02-23-2013, 05:35 AM
Last Post: Chris Smith
  Able to set HP 48G axis tick marks at integers? Randal B 1 570 01-24-2013, 12:40 AM
Last Post: Chris Dreher
  HP 48G -- entering more than one equation into the PLOT application Randal B 1 575 01-24-2013, 12:25 AM
Last Post: Chris Dreher

Forum Jump: