How to open my HP-32SII



#10

I still can't open my HP-32SII.

I have looked at the pictures at http://www.finetune.jp/~lyuka/interests/calc/hp32sII/.

And I can see that there are 4 holes under the keypad (under key 1,2 and 3) that I think is used to lock the keypad to the back cover. On the pictures these four plastic locks are missing on the back cover.

Do I have to cut these four with a tool or is there a better way?
I don't know how mych force a can use without damageing my favorite calculator.

BR,
/Sören


#11

Presumably you wouldn't be opening it unless it was already damaged?


#12

Use a 1/8" drill bit and carefully hand turn out the four heat stakes around the battery compartment. Then use a popsicle stick or other flat wooden or softer plastic to work down the sides of the calculator. Just slowly work them down each side and only keep about a centimeter inside the case. You will need to dodge the middle side posts so you don't snap them off.
Once you get about two-thirds of the way to the bottom, you will then start prying the case to work those four heat stakes loose. It does require a fair amount of force, but the stakes will pop out with a loud snapping sound.
The first time I did this I was shocked at how much the case was bending; I used my fingers and, if you can bear it (OUCH), that would be a better way to pop it apart. But using wooden popsicle sticks (or plastic spoon handles) has worked great for me as well in other repairs I have done.
Be careful not to break off or bend the four corner and two side posts (visible in the first photo on the link you attached; these will help greatly when you press the calculator back together afterward.
After you do what you need to inside the case, just line up the six posts and press it together. It will hold together surprisingly well and give you access when ever you need to. Keep in mind though; OPEN THE KEYBOARD SANDWICH ONLY IF YOU ARE SURE YOU DON'T NEED THIS CALCULATOR ANY MORE. This thing is the weak link in this series of calculator and, when it is dead, it is dead.


#13

Thanks for your answer.
This really helped me.

I didn't know how much force I had to use to open it.
Now I used a wide screw driver to loose one heat stake at a time.

I have opened it, removed the circuit board, cleaned the connectors and reassembled it.
And now the ON-button works every time.

Best regards,
/Sören


#14

Hello,
I can´t find some Infos for this model.
Do you have the "user manual" of this calculator?
If you have it in "German" or "English" please contact me.
Thanks
W.F.Schwaiger


#15

The English manual for the HP-32SII is here:
HP-32sii manual

#16

One more thing:
The reason why I had to open my calculator was that I had problem with the ON-button. It did not always work. Most of the time I had to press with a finger below the display to get the button work.

When I first opened the calculator I tried to clean the conductor strip that came from the keyboard. After I reassembled the calculator is worked fine for some weeks. Then it started to malfunction again.

The second time I took a scissor and removed 1mm of the conductor strip. On this 1mm there were no conductors. This was the main reason why it didn't work.

After reassembling the calculator it now works perfect.

Best regards,
/Sören

#17

I have a printed manual. But I think it is in swedish.
Have to check that.

BR,
/Sören

#18

Look for Paul Brogger's Article on opening a Pioneer (maybe it was a 32s)

It is in the Articles forum here at MoHPc.

http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/articles.cgi?read=199

He has other articles too. I thought he had photos somewhere, too. I think he changed one Pioneer to another at some point.

Edited: 20 May 2008, 9:47 p.m.


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP 32sii Fault Carlos Estinos 9 390 09-26-2013, 01:06 PM
Last Post: Csaba Tizedes (Hungary)
  How to open 82162A Thermal Printer Chassis? Ron Fredericks 1 184 07-17-2013, 03:58 AM
Last Post: Tony Duell
  any open source HP 10BII emulators? John 15 659 06-12-2013, 09:58 AM
Last Post: Kimberly Thompson
  HP 32sII with faulty keypad aurelio 6 280 09-21-2012, 05:08 PM
Last Post: aurelio
  Programming cable for hp-30b -> wp-34s Open letter to Gene Nigel Rowe 37 1,268 08-02-2012, 12:30 AM
Last Post: Guy Dufour
  HP 32sII Integration Error of Standard Normal Curve Anthony (USA) 4 223 03-14-2012, 03:18 AM
Last Post: Nick_S
  HP48 open/repair guides back online Han 2 176 11-04-2011, 11:15 PM
Last Post: hpnut
  An "Open" letter to "DIY" and "Repurposed" calculator projects Ethan Conner 40 1,265 10-21-2011, 04:41 PM
Last Post: Ethan Conner
  HP48 - WHY where were they made so difficult to open up? mr-scorpio 12 476 10-01-2011, 02:23 PM
Last Post: Frido Bohn
  Find the hidden path game for HP-32sii Don Shepherd 0 126 09-27-2011, 09:46 PM
Last Post: Don Shepherd

Forum Jump: