HP-11C display decay



#5

I have an HP-11C that several months ago started developing a problem with the display.

The lower right corner of the display has turned black.

It is black regardless of whether the calculator is on or off.

I tried new batteries, same thing, black with or without batteries.

The black area is roughly triangular, with side of about 5-6 mm.

The blackness has spread along the bottom of the display, reaching 1-2 mm in some areas.

Is this anything that a slightly klutzy SW Engineer could repair?


#6

The display is 'bleeding'.

If you're unsure what this means please do a search for the related words 'LCD' and 'bleeding';-)

The only possible repair is to replace the display unit.

HTH

Raymond

#7

it's boned, but slowly. since it's the right hand side; you probably have a couple of years till this is a big problem. first you have to find a screen of the right vintage. the best bets are from an old 12c or an 11 or 15 that got slammed in the tailgate but only folded the keyboard. then you're going to have to learn the art of fine soldering. you might also check with INTLCALC@aol.com or fixthatcalc.com.


#8

Hi,

there's at least one variant of the Voyager PCB layout where the display isn't soldered.

In this variant the contact between the LCD and PCB is made

through the awful 'zebra stripe' type rubber connector bands,

and the LCD housing is held in place by a metal clasp.

This PCB variant normally is the one where you have to remove _all_ heat stakes

between the PCB and the upper calc housing first to even get to the LCD...

I did this more than once, and I don't suggest it to the average user;-)

However the PCB variant where the LCD sits on it's own small PCB may be easier to handle,

at least if you swap the whole small PCB, not just the LCD unit,

since the small PCB holding the LCD and ROM is connected to the kbd PCB

using a small and fragile one-time connector pad.

This connection can be made at least twice if you're careful enough.

The limitation is that you have to find the suitable replacement, with the suitable ROM...

HTH

Raymond


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP-11C "horse racing" version Peter Murphy (Livermore) 2 211 08-12-2013, 07:34 PM
Last Post: rpn fan
  HP-11C and complex numbers Antlab 5 337 06-28-2013, 08:59 AM
Last Post: Antlab
  HP 11C Batteries have lasted 22 years nink 3 236 06-23-2013, 06:51 PM
Last Post: Les Koller
  Creeping black pattern on HP-11C screen Larry Gagnon 6 303 04-12-2013, 10:09 AM
Last Post: Peter Murphy (Livermore)
  HP 11C/12C/15C/16C case Philippe Cairic 4 284 11-06-2012, 06:04 PM
Last Post: Matt Agajanian
  Can the display for a HP32Sii be replaced with the display from another model? Bruce Larrabee 8 396 10-10-2012, 10:05 PM
Last Post: Luiz C. Vieira (Brazil)
  HP-11C Back Screws John Swisher 0 128 09-12-2012, 10:52 AM
Last Post: John Swisher
  1/2 HP-11C display Duane Hess 13 348 08-21-2012, 08:44 AM
Last Post: uhmgawa
  One owner HP 11c Ethan Conner 2 177 08-11-2012, 09:13 PM
Last Post: Fabricio
  HP 11C low battery indicator Onur Ilkorur 8 446 10-01-2011, 03:17 AM
Last Post: Katie Wasserman

Forum Jump: