HP 150 touchescreen



#2

Dear Sir,
I'm trying from a long time to produce the floppy 3.5 for HP 150 touchescreen. Unfortunately the software teledisk doesn't allow me to bring to it finishes the reconstruction of the floppy. He create the floppy 5 1/4 and they work, I have done again some floppy for HP 85/86. Who can help me to resolve my problem.

Thanks and regards,
Fabrizio


#3

Can you give more details about what you want to do ? make copies of hp-150 disks under Windows / DOS ? Transfer files from Windows / DOS to HP-150 disks ? or just format HP-150 disks ?


#4

Ciao

transfer image teledisk in DOS 3.30 486 computer

ffabrizioluga


#5

Teledisk normally works fine, I have used it to create several floppies for the HP-150. You need to use an old 3.5" floppy drive that can read/write low density disks, If you use a 486, there are good chances that it will work.

During the creation of the floppies, Teledisks gives error messages because the format is not recognized by DOS but you can ignore the messages. For some images it displays an error message after each sector but you can press a key and ignore it. At the end of the creation, it also says it cannot read the floppy but ignore this message as well, the floppy should be good for the HP-150.


Possibly Related Threads...
Thread Author Replies Views Last Post
  [OT] Pens for SHARP CE-150 printer/cassette interface Miguel Toro 4 197 01-09-2012, 09:45 AM
Last Post: Klaus
  Is peace of mind worth $150 ? Michael de Estrada 7 281 03-24-2010, 09:43 PM
Last Post: juan demin
  Slightly OT: Reviews of HP-41C & HP-150 in Byte Magazine Bill (Smithville, NJ) 17 587 09-20-2008, 07:28 PM
Last Post: Steve Simpkin
  HP-11c, 15c, 16c emulator for the HP-150 Pascal 2 153 04-11-2008, 04:14 AM
Last Post: Pascal
  Is there any interest out there in HP-150 source code ? Valentin Albillo 4 192 04-10-2008, 04:25 AM
Last Post: Pascal
  Windows 1.03 for Vectra valid for HP-150 ? Pascal 10 360 02-21-2008, 03:24 AM
Last Post: Pascal
  TI-Nspire dismantled - ARM 9 @ 150 MHz! Joerg Woerner 5 179 07-21-2007, 08:52 AM
Last Post: Namir
  Reading HP 150 floppies Derek Jones 5 214 04-12-2005, 02:41 PM
Last Post: Eric Smith
  HP110/ 150 Systems Kin Kaide Devereaux, New Orleans 1 97 08-30-2003, 11:00 PM
Last Post: andy
  Hp color copier 150 driver! Emmanuel 3 145 02-03-2003, 12:46 PM
Last Post: Vieira, Luiz C. (Brazil)

Forum Jump: