Using equation solver multiple times on HP35s..



#9

Hello All,

I recently bought a HP35s and finding it a good tool, especially the equation solver.

Let's say I have a equation R=(A-B)/(A+B). To use the equation
solver I do

EQN
->
Solve
R


Then I go and run the solver. Now when the equation finishes, if I
want to re-run the solver for the exact same equation, is there a
shortcut or do I have to do

EQN
->
Solve
R

again?

Thanks,

Rav.


#10

See section 6 in your instructions, you can write and keeep all the equations you wish. Sam

#11

You are correct: to solve the same equation a second time you need to enter the EQN list for your desired equation; right-shift SOLVE; and your variable. I don't know of a short-cut to begin the process all over again.

CHUCK


#12

I didn't know that you could use equations within a program, they complete actions easier than if you had programmed the individual actions as program steps. I entered and rearranged RECT<>POLAR programs By Jeff O and called subroutines. It was good initial practice in getting a kinesthetic sense of where keys were located and getting hands on practice and learning to find and correct mistakes, what worked and what didn't. I recommend it. His original program is: http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv017.cgi?read=122519#122519
Considering the complexity of possible programs and the state of the instructions I think we must learn from each other.
When the original 35 came out I suggested we rewrite formulas into keystroke sequences, I think it increasingly important to move from the pencil and paper era to take advantage of the calculator
capabilities. E Samuuel Levy RET EE


#13

Hello Guys,

So it doesn't look like you can invoke the solve once and then use
it again.

For clarification. The equation R=(A-B)/(A+B) is for calculating
the reflection coefficient from the load impedance and the
reference impedance. The nice thing about the HP35s is that the
above equation can handle the variables being complex numbers.

Sometimes I would like to have a bunch of impedances that I need
to work out the reflection coefficients for, so I use the HP35s
and the equation above. Just a little annoying have to go

Eqn
r->
solve
R

each time.


#14

Quote:
So it doesn't look like you can invoke the solve once and then use
it again.

That's one of the reasons I lost interest in the 35s, because the solver is essential to my calculator use. My 27s and 17b make it very easy to do repeat solves. Even with the lowly 22s it is easier to do this than with the 35s.

#15

Guys,

Another option is to simply write a program for this equation, and set FN equal to whatever the label of the program is. You can use SOLVE (VAR) repeatedly thereafter.

Jeff Kearns


#16

You may type any equation you want, as many as you want using EQN. You may use cursors to scroll through equations to the one you want. Anytime that equation is shown you can use SOLVE_ to solve for whatever variable you want. Key the desired variable, and it will prompt you for the missing values. If you have them stored it shows that value, if correct R/S, otherwise key in the correction.
You can change a number to Imaginary by keying i X, then you may add the real part. The equation may not be an expression, it must have an equals sign. If you wish to disuse your 35S let me know. Sam


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP35s Program Four Slings Lift Calculation Jean-Marc Biram (Australia) 2 259 12-16-2013, 07:21 PM
Last Post: Jean-Marc Biram (Australia)
  HP35s Calculator Max Rope Tension Program Jean-Marc Biram (Australia) 10 495 12-12-2013, 12:03 AM
Last Post: Jean-Marc Biram (Australia)
  hp-prime solver and variable name fabrice48 22 869 12-10-2013, 03:25 AM
Last Post: fabrice48
  HP Prime Triangle solver BruceH 29 1,121 11-28-2013, 12:03 AM
Last Post: Dale Reed
  Equation Library/App for the Prime Harold A Climer 3 212 10-30-2013, 10:14 AM
Last Post: CompSystems
  Equation Library on the PRIME Harold A Climer 0 120 10-26-2013, 10:01 AM
Last Post: Harold A Climer
  setting up subroutines that are called many times... Geoff Quickfall 4 272 10-18-2013, 03:41 AM
Last Post: Geoff Quickfall
  Using units in Numeric Solver Harold A Climer 1 158 10-13-2013, 10:44 AM
Last Post: Tim Wessman
  Meltiple Equation Solver PRIME Vs. HP 50G Harold A Climer 5 259 10-07-2013, 05:11 PM
Last Post: CR Haeger
  EOT--TI N-Spire Equation Limit Matt Agajanian 2 175 09-22-2013, 12:37 PM
Last Post: Matt Agajanian

Forum Jump: