hp 45 conversion to quartz timer



#7

Hi there, before I bolt up the HP 45 and replace the back label I was wondering if anyone has done the timer to quartz timer conversion as posted here:

http://www.hpmuseum.org/45crys.htm

If so, I have a few questions:

Has anyone done this conversion?
Where would you find a 784 kHz crystal?
Is the HP 55 crystal also a 784 kHz crystal?

Cheers and thanks in advance, Geoff.


#8

It appears defective HP-55's could be a source for 784 kHz crystal. But they might be as hard to find as the crystals themselves... Here are some old threads on the subject, in case you haven't read them yet:


http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv014.cgi?read=55735

http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv017.cgi?read=111750

http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv012.cgi?read=32527

http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv017.cgi?read=117717

Gerson.


#9

Thanks Gersen,


I have a 55 keyboard and battery spine with the correct quartz crystal on it's way. It is a spare which will be parted for my HP 55 restoration and now as a source for the HP45 timer.

I tried a search but it would seem your prowess at that is WAY better than mine.


Cheers, Geoff


#10

You're welcome, Geoff!

No secret about the search: just google for site:hpmuseum.org HP-45 + crystal, in case you want only results from the museum. This search-key will return 28 results:

http://www.google.com/search?q=site:www.hpmuseum.org+HP-45+%2B+crystal&hl=en&start=0&sa=N

I am looking forward to your crystal mod pics :-)

Cheers,

Gerson.

#11

Instead of a crystal, what about just fine-tuning the oscillator that's already there to get it close to 784 kHz. Surely you won't be using the 55 as a timer for something that requires super accuracy, will you? After all, the most inaccurate part will be the finger pushing the start and stop buttons.

Stefan


#12

I use this for timing in the aircraft as well as an HP41cx customized for the aircraft.

The HP 45 is just an excercise as I will have a spare 784 kHz crystal on it's way.

The only real use for either the HP 55 or 45 (corrected) would be while they were plugged in as this mode really drains the batteries quickly.

Cheers, Geoff

Edited: 22 Jan 2008, 8:45 p.m.


Possibly Related Threads...
Thread Author Replies Views Last Post
  HP 35s polar/rectangular conversion CD Dodds 6 285 11-28-2013, 02:39 PM
Last Post: Dieter
  [Prime] Shutdown timer bug? Cristian Arezzini 2 174 11-16-2013, 10:34 AM
Last Post: Cristian Arezzini
  [WP 34s] Pressure Conversion Factors Timothy Roche 8 406 11-04-2013, 07:17 PM
Last Post: Dave Shaffer (Arizona)
  More programs for polar-rectangular conversion on HP Prime Michael de Estrada 4 246 11-04-2013, 12:43 AM
Last Post: Michael de Estrada
  HP Prime: Conversion factors Paul Townsend (UK) 19 674 08-27-2013, 09:19 AM
Last Post: Nigel J Dowrick
  Repair HP 45 Nanoman 3 168 04-12-2013, 05:40 PM
Last Post: BobVA
  Recharging original batteries in HP 45, 65 and 25 Michae Altmann 1 141 03-05-2013, 12:21 AM
Last Post: DavidShenk
  WP34S conversion, yet another but with a difference Geoff Quickfall 23 750 06-22-2012, 02:54 PM
Last Post: Marcus von Cube, Germany
  [WP-34s] Conversion proposal Alexander Oestert 19 575 06-15-2012, 05:36 AM
Last Post: fhub
  [WP-34s] IR conversion of 20b Alexander Oestert 3 231 05-18-2012, 05:38 PM
Last Post: Harald

Forum Jump: