O.T.: Basic Transistor Engineering Question



#2

I am a chemist and really not at all any kind of engineer.

In regard to flash memory MOSFET configurations, why is the NOR (parallel or random access) setup designed to use hot electron (holes, too?) injection to program while the NAND version (serial, block access) exclusively uses Fowler-Nordheim injection?

The latter appears more efficient, seems to use less power, and spares the transistor of excess aging.

I would really like to know why the hot carrier injection design is still used.


#3

It is a complex battle of both technology trade-offs and vested interests by semiconductor manufacturers.
See this article for appliations in mobile hansets:
http://www.embedded.com/columns/technicalinsights/165701775?_requestid=82339

Quoting from the end of the article: "Right now, NAND still lags NOR in read speed, while NOR is considerably behind NAND in density. Until one technology can bridge the advantage gap offered by the other, there will continue to be cases, such as in the NEC FOMA 900iL handset, where NAND and NOR can, and will, co-exist."

INTEL and ST are continuing to push their NOR technologies and now are competing better on density by using 4 levels in a cell to store 2 bits per cell.

http://www.st.com/stonline/products/promlit/pdf/flnormob1005.pdf


#4

Interesting!

But why even use the hot electron injection design in NOR cells?

#5

Some NOR flash parts do use Fowler-Nordheim tunneling for both program and erase (vs. the majority of NOR flash that uses hot electron injection for program and Fowler-Nordheim tunneling for erase). I'm not sufficiently conversant with the issues to know why most NOR flash parts still use hot electron injection.

Edited: 5 Nov 2007, 2:58 p.m.


Possibly Related Threads…
Thread Author Replies Views Last Post
  HP48GX - looking for Chotkeh Engineering Review Software MANUAL giancarlo 0 1,413 12-06-2013, 04:28 PM
Last Post: giancarlo
  [OT] engineering student chalenge cyrille de Brébisson 1 1,345 11-25-2013, 10:06 PM
Last Post: FORTIN Pascal
  HP 50g - displaying result in engineering format Sean Freeman 10 3,371 11-24-2013, 05:44 AM
Last Post: C.Ret
  HP-67/97 Mechanical engineering PAC cover Ignacio Sánchez 0 1,056 10-30-2013, 04:35 AM
Last Post: Ignacio Sánchez Reig
  Crowdfunding the Prime "engineering" firmware Eelco Rouw 24 6,867 10-28-2013, 01:23 AM
Last Post: Howard Owen
  HP PRIME - Need help for basic program svp. dg1969 4 1,785 10-08-2013, 04:06 PM
Last Post: dg1969
  Easter Sunday Basic Trigs (HP-12C) Gerson W. Barbosa 29 8,898 04-04-2013, 02:19 PM
Last Post: Gerson W. Barbosa
  "The Basic HP-71" Jeff Davis 3 1,617 08-30-2012, 12:20 AM
Last Post: Howard Owen
  HP 50G Electrical Engineering is available now Software49g 1 1,108 04-10-2012, 01:34 PM
Last Post: Namir
  HP 50G Electrical Engineering Software49g 0 904 02-27-2012, 08:28 AM
Last Post: Software49g

Forum Jump: