50G Edat register loading



#3

Hi folks.
I am just starting to use the statistical functions on my 50G, and need some help with loading the Edat register. Please be aware that I am not submitting this posting "off the cuff", as I have tried to derive the solution from both the user's guide and the users manual.

Here's my quandry: The users guide speaks of a functionality whereby I can load a newly written matrix directly from the matrix writer environment into the Edat (summation data) register by clicking on the EDAT softkey which, according to the manual, is supposed to be labeled in the matrix writer environment. There is no EDAT softkey label visible when I'm in the matrix writer. The only way I can get a newly written matrix into the EDAT register is to put it onto the stack first, then overwrite it into EDAT in the usual way (left shift, they hit the EDAT variable label). Granted it is not difficult to do it this way, but it seems that if the manual alludes to a more direct method, I should be able to use it. Any help on this would be appreciated.

Best regards, Hal


#4

I don't think you can actually do anything with a matrix that is loaded into the MatrixWriter, except edit it. I think you have to exit the MatrixWriter environment before you can save the matrix to EDAT (or anywhere else). The HP-50G apparently feels that a matrix is still a work in progress as long as MatrixWriter is open, so it won't let you store the matrix until MatrixWriter is closed.

Once you've left the MatrixWriter and the completed matrix is on the stack, you can store it in EDAT with [left-shift] EDAT, or by invoking STOE from CAT (it's the last STO command), or by typing STOE ENTER (use CHARS ECHO1 for the Sigma). But none of these approaches seem to work while you're in the MatrixWriter.

Technically, it is possible to bring up an EDAT softkey within the MatrixWriter, by typing 96 MENU, then hitting ENTER and DATA. Or you could create a custom menu with EDAT or STOE softkeys, and then bring up your custom menu within the MatrixWriter. But if you try this, you will soon learn that the softkeys will only address the contents of the stack, even though the stack is not visible. The softkeys will not pay any attention to the contents of the MatrixWriter, even when they have been opened in the MatrixWriter environment.

I know of one other approach. You can enter the MatrixWriter Environment through [right-shift] STAT ENTER (to select the "single var" option) EDIT. After entering one or two columns of data, you can press ENTER ENTER to exit. If you go in and out of the MatrixWriter this way, your new matrix will automatically be saved into EDAT.


Edited: 18 Sept 2007, 12:33 p.m.


Possibly Related Threads...
Thread Author Replies Views Last Post
  Loading .prgm files to the Prime Thomas Chrapkiewicz 8 760 10-25-2013, 09:34 AM
Last Post: Eddie W. Shore
  Problem loading library into emulator Tom Grydeland 2 331 09-08-2013, 08:42 AM
Last Post: Marcus von Cube, Germany
  Little curiosity: why the fourth stack register is called "T"? Antlab 34 2,022 07-03-2013, 04:49 PM
Last Post: Walter B
  [WP34S] Register use by functions. Chris Tvergard 5 452 05-12-2012, 03:35 AM
Last Post: Walter B
  HP-34C Storage Register Arithmetic & Programming Matt Agajanian 14 978 05-08-2012, 11:04 AM
Last Post: Matt Agajanian
  Sleek approach to Register Exchange on HP-29C Matt Agajanian 8 563 03-16-2012, 01:04 PM
Last Post: Marcus von Cube, Germany
  Vintage HP15C Key Clicks but Doesn't Register Bruce Zastera 15 907 01-27-2012, 06:18 PM
Last Post: uhmgawa
  How to register new HP 15C LE? hpnut 8 595 11-18-2011, 01:09 PM
Last Post: Martin Pinckney
  Unable to register the 15c LE Neil Carlson 3 290 09-29-2011, 08:27 PM
Last Post: CAD_Jockey
  hp 41 register swap Sok-khieng Chum Hun 3 323 06-30-2010, 08:14 PM
Last Post: Thomas Klemm

Forum Jump: