Connectivity Issues with 48G series



#7

I have both a HP-48G and a 48G+. I used to be able to connect to them oh-so-easily. Ever since Win XP, I can easily connect to a 49G+, but neither of the 48G series babies can connect.

The error message always says that no calculator or no device is found on COM2. I hope the only old fashioned serial port on my PC is COM2, as my link cable is 48G proprietary four pin to serial.

Are there any of you here who are able to consistently connect successfully their 48G series machines to their PC? I'd love to get my 48G and G+ back onto the PC.


#8

RS232 ports when native on the motherboard usually default to COM1 unless you specify otherwise. Check your settings in the START-> Control panel -> Hardware device manager.

If nothing else, get a USB to serial converter. This will allow you to configure the COM ports more easily compared to a hardwired RS232. As a side note, many manufacturers are not FULLY supporting the Rs323 interface at the specification level w/r/t the DTR and other important signals- this is especially prevalent in Laptop computers where the pins may LOOK like Rs232, but they do not fully behave RS232.


#9

Why, thank you for the insight!

I appear to have three ports listed in the Device Manager: COM1, COM2, and LPT1.

I don't see a way to reconfigure the ports and there is only ONE such port on my motherboard. Bleaghh.

If I use a USB to serial converter, it looks like I'll use one yet another USB port... but may be worth it. I'll look into that, too.

#10

My HP-48G and my laptop have no problem talking to each other. On the PC end I use Windows XP Home and Conn4x; the machine has no serial ports built-in but everything works fine with an external USB-to-serial converter.

- Thomas


#11

I see. It appears more and more this is the way to go. Legacy stuff; bah. Yeah, yeah, I know... just like the rest of us here, I'm a "legacy" calculator nut...

... but how does this converter work?

If I connect the serial end of the converter cable to my serial port, I have a USB end left; not usable on the 48G.

If I connect the USB end to a USB port, I have a serial end left; still unusable on the 48G...

... unless the serial end of my existing 48G to serial cable connects to the converter which then plugs into a USB port...

... right?


Edited: 5 Aug 2007, 12:21 a.m.


#12

Quote:
unless the serial end of my existing 48G to serial cable connects to the converter which then plugs into a USB port

Yes, that's how it works.


Possibly Related Threads...
Thread Author Replies Views Last Post
  Prime Connectivity Kit Suggestion toml_12953 1 191 12-06-2013, 10:41 PM
Last Post: Michael de Estrada
  Gathering USB dumps for Connectivity Kit <-> 39gII communication... debrouxl 2 255 12-01-2013, 12:59 PM
Last Post: Marcus von Cube, Germany
  HP Prime Connectivity software in Virtualbox/wine Chris Pem10 2 216 11-22-2013, 02:20 PM
Last Post: Chris Pem10
  HP Prime - Connectivity kit purpose bluesun08 2 193 11-11-2013, 10:37 AM
Last Post: Michael de Estrada
  Connectivity Kit Les Koller 1 178 11-10-2013, 06:38 PM
Last Post: Michael de Estrada
  Hp PRIME - how to send a list to the connectivity Kit giancarlo 1 196 11-10-2013, 11:50 AM
Last Post: Tim Wessman
  Re: [WP34S] Flashing Issues Les Wright 22 1,026 10-30-2013, 02:16 PM
Last Post: Les Wright
  Proper location for files on the PC for Connectivity Kit ,etc. Harold A Climer 8 438 10-23-2013, 02:43 AM
Last Post: Marcus von Cube, Germany
  HP Prime vs. 39gII Connectivity Kit Marcus von Cube, Germany 3 285 10-09-2013, 05:44 PM
Last Post: Marcus von Cube, Germany
  HP-Prime: issues in entering expressions fhub 30 1,064 10-02-2013, 12:32 AM
Last Post: Tim Wessman

Forum Jump: