HP41 CX Speaker Cable connectin to board



#3

Hello,

I'have a HP41 CX build in 1987. The speaker inside is fixed
inside on the backside. When I opened the HP41 the two cables
of the speakers are brocken. Can you tell where I must connect the speaker cables on the board.
Many thanks.
Greetings Dieter


#4

Hi,

Please take a look at:

http://www.clonix41.org/Maintenance/hp-41_PCBs.htm

You'll find Halfnut board on the left-bottom of this page, there is a "big" brown capacitor (center bottom of the board) and a couple of pads to the rigth of said capacitor (between the cap and the [hp] logo on the board)

One of these pads is square (the rightmost) solder the black wire there, and the red wire to the round pad.

Hope this helps.

Diego.


Possibly Related Threads...
Thread Author Replies Views Last Post
  The Lucky WP34S Cable eri 7 739 12-22-2013, 05:18 AM
Last Post: Walter B
  DIY HP 30b WP 34s serial flash/programming cable Richard Wahl 2 484 12-04-2013, 11:14 AM
Last Post: Barry Mead
  PIL-box w/o IL cable = paper weight Joe Horn 15 1,169 11-26-2013, 01:05 AM
Last Post: Les Wright
  HP30b cable I can borrow? eri 7 600 11-10-2013, 07:55 PM
Last Post: Paul Berger (Canada)
  WP-34s ISP (flashing cable) again ;( Bernhard 16 1,198 11-01-2013, 05:02 PM
Last Post: Bernhard
  Compatibility of new HP PRIME Cable Harold A Climer 8 608 10-13-2013, 01:14 PM
Last Post: Eric Smith
  WP34 cable Mike Powell 9 647 09-29-2013, 07:27 AM
Last Post: Mike Powell
  Flashing cable for HP 20 / 30B Stefan Koenig 3 408 09-19-2013, 05:53 AM
Last Post: Marcus von Cube, Germany
  Self-made WP-34s flashing cable? Victor Koechli 6 645 08-15-2013, 10:11 AM
Last Post: Les Wright
  JTAG cable for HP30B? John Ioannidis 2 308 07-01-2013, 02:16 PM
Last Post: John Ioannidis

Forum Jump: