15C program question



#4

I was looking at the programs we have here, and in the longer quadratic program, it lists a command that I am not familiar with.

026 RCL: 1

I understand the RCL and the 1, but what does the colon signify and how do I enter that on the 15C?

- John


#5

It probably is a "division" operation, so just press the RCL key, the division key, and the "1" key.

Best regards from V.


#6

Thanks... that's odd... normally you will see / for division.

Thanks again for the heads up.

#7

is it RCL <decimal point> 1 i.e. RCL 11 ?


#8

No... it is a colon.


#9

If you are referring to http://www.hpmuseum.org/software/15cquad.htm then it should be RCL/, not RCL:.

Register 1 contains 2a, so RCL/ 1 is required to get the correct answer.


#10

Well, I treated the colon as a divide, so it really wouldn't matter. Is there something else the colon can stand for as I have seen it before, but then a few lines below I would see them use the forward slash so it was as if they were using it interchangeably, which does not make any sense.

#11

Quote:
026 RCL: 1

I understand the RCL and the 1, but what does the colon signify and how do I enter that on the 15C?


As Valentin and others have stated, I think it's supposed to be "divide". The original intent was probably to superimpose ":" on "-", to make a divide sign. A capital theta can similarly be formed by superimposing "-" on a "0".

-- KS


Possibly Related Threads…
Thread Author Replies Views Last Post
  HP Prime: run a program in another program Davi Ribeiro de Oliveira 6 2,735 11-11-2013, 08:28 PM
Last Post: Davi Ribeiro de Oliveira
  HP 15C LE, Program Display Format Control Uli 4 2,392 01-20-2013, 01:22 AM
Last Post: Ethan Conner
  New Blog Entry: Honnold Mudd Library, World Series, and a HP 15C Program Eddie W. Shore 0 929 09-30-2012, 06:05 PM
Last Post: Eddie W. Shore
  42s program question David Persinger (US) 5 1,817 08-09-2012, 06:34 AM
Last Post: David Persinger (US)
  Program works in emulators but not on HP-15c hardware Marcel Samek 32 8,007 05-11-2012, 08:46 PM
Last Post: Jeff O.
  WP34S program question Mike Maiorana 12 3,266 04-05-2012, 03:09 AM
Last Post: Steve Simpkin
  HP 15c question about [ENTER] nina scholz 5 1,850 03-29-2012, 10:13 AM
Last Post: M. Joury
  15C programming question Eric Zoob 7 2,298 03-28-2012, 03:14 PM
Last Post: C.Ret
  15C keyboard question Matt Agajanian 7 2,281 03-28-2012, 02:18 AM
Last Post: Dwight Sturrock
  Original 15C Keyboard Test Works With 15C LE!!! DigiGal 5 2,251 09-26-2011, 07:33 PM
Last Post: M. Joury

Forum Jump: