I am testing a 9114B post-repair and get the following error after a successful copy of a specific file (MATHROM.LEX):
HPIL ERR:Not LIF FormatOnce I get this error I cannot read the disk again until I power cycle the drive or initialize the diskette.
I am using EMU71 with an HP-IL ISA adapter and a 9114B.
Session:
>INITIALIZE :HP9114BPower cycle or initialize and all is well again.
>COPY MATHROM:HDRIVE2 TO :HP9114B (:HDRIVE2 = lexfl1.lif)
>COPY JPCLEX:HDRIVE2 TO :HP9114B (:HDRIVE2 = lexfl1.lif)
>COPY WB71:HDRIVE2 TO :HP9114B (:HDRIVE2 = lexfl1.lif)
>COPY NIBBLEX:HDRIVE2 TO :HP9114B (:HDRIVE2 = lexfl1.lif)
>COPY LEXOFF:HDRIVE2 TO :HP9114B (:HDRIVE2 = lexfl1.lif)
>CAT :HP9114BNAME S TYPE LEN DATE TIME
MATHROM LEX 32745 05/02/07 00:56
JPCLEX LEX 11173 05/02/07 01:00
WB71 ROM 32768 05/02/07 01:04
NIBBLEX LEX 329 05/02/07 01:05
LEXOFF LEX 152 05/02/07 01:05>INITIALIZE :HDRIVE1
>COPY JPCLEX:HP9114B TO :HDRIVE1
>COPY WB71:HP9114B TO :HDRIVE1
>COPY NIBBLEX:HP9114B TO :HDRIVE1
>COPY LEXOFF:HP9114B TO :HDRIVE1
>COPY MATHROM:HP9114B TO :HDRIVE1HPIL ERR:Not LIF Format (huh?)
>CAT :HDRIVE1 (file did get copied. I verified with lifget/md5sum, all bits are there)
NAME S TYPE LEN DATE TIME
JPCLEX LEX 11173 05/02/07 01:07
WB71 ROM 32768 05/02/07 01:08
NIBBLEX LEX 329 05/02/07 01:09
LEXOFF LEX 152 05/02/07 01:09
MATHROM LEX 32745 05/02/07 01:09>CAT :HP9114B (cannot read drive)
HPIL ERR:Not LIF Format
What is special about MATHROM.LEX?
Could this be isolated to EMU71?
Is there any other way to reset the 9114B remotely?
Thanks.