HP-42S -- Memory Upgrade?



#2

I just opened two HP-42S and fixed one (See "Re: HP-42s How To Open", elsewhere). I found pads for what looks like a spot for another surface-mount RAM or ROM chip on the PCB. It's two rows of 14, so another 28-pin chip could be placed there.

Does anyone know if this is for RAM? Does anyone know how to jumper it so it'll work? (There are several spots where interlaced traces allow for intentional solder bridge "jumpers" to be set.) Does anyone know the maximum RAM/ROM capacity of an HP-42S?

Heck, if I could install, say, 32K on a -42S, I'd be in some weird calculator Nirdvana . . .


#3

In case anyone's interested, I tried a 32K chip in the "extra" memory location on my HP-42S circuit board. No combination of jumpers would make it recognize anything other than the ~6K of memory available normally. (I was able to break it temporarily, but fortunately I didn't seem to harm it permanently . . .) I'd guess the extra pads are for an alternate-source ROM and/or a different model calculator. (-17B or -27S, perhaps?)


#4

Makes sense to have only a few PCB's with which one can make a whole range of models. Just swap ROMs and put in a bit of RAM, and hey presto! a new model is born!

#5

Did you make photos of the opening of the calculator ? Just curious, how it looks like in the interior.


#6

I've offered photos to David Hicks for inclusion in the Pioneer "Technology and Packaging" secion of the MoHPC. He's expressed interest, so (perhaps next week) I'll be taking a few shots of the Pioneers I have opened, and sending them along. You'll see 'em in the MoHPC "one of these days".


Possibly Related Threads...
Thread Author Replies Views Last Post
  Almost totally OT: Looking for Sharp EL-9900G ROM upgrade Marcus von Cube, Germany 3 379 03-03-2013, 09:35 AM
Last Post: Marcus von Cube, Germany
  HP10BII+ question (ROM upgrade is possible?!?) Csaba Tizedes (Hungary) 6 575 02-21-2013, 05:19 PM
Last Post: Eric Smith
  41 User Memory vs System Memory Gerry Schultz 6 616 07-01-2012, 12:02 AM
Last Post: Monte Dalrymple
  [WP-34S] Upgrade in 10 mins. now v 3.1 2988 Chris Tvergard 12 921 06-01-2012, 02:39 AM
Last Post: Walter B
  HP-41C pcb connector upgrade Hans Brueggemann 6 538 05-19-2012, 10:17 AM
Last Post: aurelio
  USB-41 status update: Upgrade available v3.0 Diego Diaz 2 310 04-24-2012, 07:50 AM
Last Post: Diego Diaz
  42s questions and 42s vs 35s snaggs 13 1,256 09-19-2011, 02:44 AM
Last Post: snaggs
  HP 50G - ROM upgrade under Linux Glenn Becker 6 472 07-10-2011, 06:22 PM
Last Post: Glenn Becker
  42s upgrade Paul Dale 22 1,423 05-16-2010, 02:38 PM
Last Post: geoff quickfall
  Upgrade to HP Museum DVD Set Version 7.0 Gerry Schultz 1 244 12-01-2009, 06:31 PM
Last Post: Walter B

Forum Jump: